Tough Alloys
KHATTAR GALI,, Mumbai, Maharashtra
GST No. 27AASHM3103L1ZX
Call 08043851501 86% Response Rate
Nitronic Products
Super Alloy Nimonic 105
Minimum Order Quantity: 1 Kg
Product Brochure
| Unit Length | Any Size |
| Material | Nimonic 105 |
| Shape | Round |
| Material Grade | Nimonic 105 |
| Single Piece Length | Any Size |
| Usage/Application | Industrial |
| I Deal In | New Only |
Super alloys or high performance alloys are available in a variety of shapes and contain elements in different combinations to obtain a specific result. These alloys are of three types that include iron-based, cobalt-based and nickel-based alloys. The nickel-based and cobalt-based super alloys are available as cast or wrought based alloys based on composition and application.
Super alloys have good oxidation and creep resistance and can be strengthened by precipitation hardening, solid-solution hardening and work hardening methods. They can also function under high mechanical stress and high temperatures and also in places that require high surface stability
Super alloy nNimonic 105™ is a nickel-cobalt-chromium alloy. The following datasheet provides an overview of Nimonic 105™.
Chemical CompositionThe chemical composition of Nimonic 105™ is outlined in the following table.
| Element | Content (%) |
|---|---|
| Nickel, Ni | 51 |
| Cobalt, Co | 18-22 |
| Chromium, Cr | 14-15.7 |
| Molybdenum, Mo | 4.50-5.50 |
| Aluminum, Al | 4.50-4.90 |
| Iron, Fe | 1 |
| Manganese, Mn | 1 |
| Silicon, Si | 1 |
| Titanium, Ti | 0.90-1.50 |
| Copper, Cu | 0.20 |
| Zirconium, Zr | 0.15 |
| Carbon, C | 0.12 |
| Sulfur, S | 0.010 |
| Boron, B | 0.0030-0.010 |
The following table shows the physical properties of Nimonic 105™.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.01 g/cm³ | 0.289 lb/in³ |
| Melting point | 1327°C | 2420°F |
The mechanical properties of Nimonic 105™ are displayed in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength (precipitation hardened, value at room temperature) | 1150 MPa | 167000 psi |
| Yield strength (precipitation hardened, value at room temperature, @strain 0.200%) | 770 MPa | 112000 psi |
| Elongation at break (precipitation hardened) | 25% | 25% |
The thermal properties of Nimonic 105™ are given in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Thermal expansion co-efficient (@20-100°C/68-212°F) | 12.2 µm/m°C | 6.78 µin/in°F |
| Thermal conductivity | 10.89 W/mK | 75.58 BTU in/hr.ft².°F |
Additional Information:
- Production Capacity: 10000
- Delivery Time: Ready Stock
- Packaging Details: Export Packaging
View Complete details
Nimonic Alloy 75 (UNS N06075) Plate Sheet
Minimum Order Quantity: 1 Kg
Product Brochure
| Material | Nimonic 75 |
| Shape | Round and Rectangular |
| Material Grade | Nimonic 75 |
| Single Piece Length | Any Size |
| Usage/Application | Industrial |
| I Deal In | New Only |
NIMONIC alloys are made up of nickel and chromium. These alloys are characterised by their high-temperature low-creep and high performance. Additives like titanium and aluminium are used for enhancing the strength of the alloy. The NIMONIC alloy was first developed during the 1940s in England.
NIMONIC alloys that are available commercially are NIMONIC 75. NIMONIC 90, NIMONIC 100, NIMONIC 80A, 81, 86, NIMONIC 90, NIMONIC PE11 and 16. The NIMONIC alloy 75 is an 80/20 nickel-chromium alloy containing titanium and carbon as additives. This alloy was first introduced for use as turbine blades during the 1940s. It is readily fabricated and welded. This alloy exhibits good corrosion resistance, mechanical properties and heat resistance. Some of the standard forms in which this alloy is available are extruded section, hexagon flats, pipe, plate, strip and wire.
This datasheet will look into the chemical composition, properties and applications of NIMONIC alloy 75.
Chemical CompositionThe chemical composition of NIMONIC alloy 75 is given in the following table.
| Element | Content (%) |
|---|---|
| Nickel, Ni | Remainder |
| Chromium, Cr | 18-21 |
| Iron, Fe | 5.00 max |
| Silicon, Si | 1.00 max |
| Manganese, Mn | 1.00 max |
| Titanium, Ti | 0.2-0.6 |
| Copper, Cu | 0.5 |
| Carbon, C | 0.08-0.15 |
The following table discusses the physical properties of NIMONIC alloy 75.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.37 gm/cm3 | 0.302 lb/in3 |
The mechanical properties of NIMONIC alloy 75 are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength(annealed) | 750 MPa | 109 ksi |
| Yield strength(annealed) | 275 MPa | 40 ksi |
| Elongation at Break | 42% | 42% |
| Modulus of Elasticity | 206 GPa | 29878 ksi |
Additional Information:
- Production Capacity: 10000
- Delivery Time: Ready Stock
- Packaging Details: Export Packaging
View Complete details
Nimonic Alloy 80A (UNS N07080) Plate Sheet
Minimum Order Quantity: 1 Kg
Product Brochure
| Unit Length | Any Size |
| Material | Nimonic sheet 80A |
| Shape | Rectangular |
| Material Grade | Nimonic 80A |
| Usage/Application | Industrial |
| I Deal In | New Only |
NIMONIC alloys are primarily composed of nickel and chromium. These alloys are known for their high-temperature low-creep and high performance. Additives like aluminium, carbon and titanium are infused into the alloy. The NIMONIC alloy was first developed in 1940 in England. NIMONIC alloys available commercially are NIMONIC 75, NIMONIC 80A, 81, 86, NIMONIC PE11 and 16.
NIMONIC alloy 80A is a wrought, age-hardened alloy that is strengthened by additives like titanium, aluminium and carbon. It is manufactured by high-frequency melting and casting in air. It is similar to NIMONIC alloy 75. It has good corrosion and oxidation resistance. The creep rupture and tensile properties are high at 815°C (1500°F).
This datasheet will look into the chemical composition, properties and applications of NIMONIC alloy 80A.
Chemical CompositionThe chemical composition of NIMONIC alloy 80A is given in the following table.
| Element | Content (%) |
|---|---|
| Nickel, Ni | 69 |
| Chromium, Cr | 18-21 |
| Iron, Fe | ≤3 |
| Cobalt, Co | ≤2 |
| Titanium, Ti | 1.8-2.7 |
| Aluminum, Al | 1.0-1.8 |
| Others | Remainder |
The following table discusses the physical properties of NIMONIC alloy 80A.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.19 gm/cm3 | 0.296 lb/in3 |
The mechanical properties of NIMONIC alloy 80A are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength(annealed) | 1250 MPa | 181 ksi |
| Yield strength(annealed) | 780 MPa | 113 ksi |
| Elongation at Break | 30% | 30% |
Additional Information:
- Production Capacity: 10000
- Delivery Time: Ready Stock
- Packaging Details: Export packaging
View Complete details
Super Alloy Nimonic Alloy 263 UNS N07263 Plate Sheet
Minimum Order Quantity: 1 Kg
Product Brochure
| Unit Length | As Per Requirement |
| Material | Nimonic sheet 263 |
| Shape | Rectangular |
| Material Grade | Nimonic 263 |
| Single Piece Length | Any Size |
| Usage/Application | Industrial |
| I Deal In | New Only |
Super alloys are also called high performance alloys. They contain a number of elements in a variety of combinations to reach the desired result. These alloys can function in environments with high temperatures and severe mechanical stress, and also in cases where high surface stability is needed. Super alloys have good creep and oxidation resistance.
Strengthening of super alloys is performed by work hardening, solid-solution hardening, and precipitation hardening methods.
Nimonic Alloy 263™ is a British nickel-chromium-cobalt-molybdenum alloy specially meant for use in high temperature and high strength applications. This alloy can be precipitation-hardened.
The following datasheet will provide more details about Nimonic Alloy 263™.
Chemical CompositionThe following table shows the chemical composition of Nimonic Alloy 263™.
| Element | Content (%) |
|---|---|
| Nickel, Ni | 49 |
| Cobalt, Co | 19-21 |
| Chromium, Cr | 19-21 |
| Molybdenum, Mo | 5.60-6.10 |
| Titanium, Ti | 1.90-2.40 |
| Iron, Fe | 0.70 |
| Manganese, Mn | 0.60 |
| Aluminum, Al | 0.60 |
| Silicon, Si | 0.40 |
| Copper, Cu | 0.20 |
| Carbon, C | 0.040 - 0.080 |
| Boron, B | 0.0050 |
| Sulfur, S | 0.0070 |
The physical properties of Nimonic Alloy 263™ are outlined in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.36 g/cm³ | 0.302 lb/in³ |
| Melting point | 1300-1355°C | 2370-2471°F |
The mechanical properties of Nimonic Alloy 263™ are provided below.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength (precipitation hardened, value at room temperature) | 940 MPa | 136000 psi |
| Yield strength (@strain 0.200%, precipitation hardened, value at room temperature) | 550 MPa | 79800 psi |
| Elongation at break (precipitation hardened) | 39% | 39% |
The thermal properties of Nimonic Alloy 263™ are given below.
| Properties | Metric | Imperial |
|---|---|---|
| Thermal expansion co-efficient (@21-100°C/69.8-212°F) | 10.3 µm/m°C | 5.72 µin/in°F |
| Thermal conductivity | 11.7 W/mK | 81.2 BTU in/hr.ft².°F |
Additional Information:
- Production Capacity: 10000
- Delivery Time: Ready Stock
- Packaging Details: Export Packaging
View Complete details
Super Alloy Nimonic 105 Sheet Plate
Minimum Order Quantity: 1 Kg
Product Brochure
| Unit Length | Any Size |
| Material | Nimonic sheet 105 |
| Shape | Rectangular |
| Material Grade | Nimonic 105 |
| Single Piece Length | Any Size |
Super alloys or high performance alloys are available in a variety of shapes and contain elements in different combinations to obtain a specific result. These alloys are of three types that include iron-based, cobalt-based and nickel-based alloys. The nickel-based and cobalt-based super alloys are available as cast or wrought based alloys based on composition and application.
Super alloys have good oxidation and creep resistance and can be strengthened by precipitation hardening, solid-solution hardening and work hardening methods. They can also function under high mechanical stress and high temperatures and also in places that require high surface stability
Super alloy nNimonic 105™ is a nickel-cobalt-chromium alloy. The following datasheet provides an overview of Nimonic 105™.
Chemical CompositionThe chemical composition of Nimonic 105™ is outlined in the following table.
| Element | Content (%) |
|---|---|
| Nickel, Ni | 51 |
| Cobalt, Co | 18-22 |
| Chromium, Cr | 14-15.7 |
| Molybdenum, Mo | 4.50-5.50 |
| Aluminum, Al | 4.50-4.90 |
| Iron, Fe | 1 |
| Manganese, Mn | 1 |
| Silicon, Si | 1 |
| Titanium, Ti | 0.90-1.50 |
| Copper, Cu | 0.20 |
| Zirconium, Zr | 0.15 |
| Carbon, C | 0.12 |
| Sulfur, S | 0.010 |
| Boron, B | 0.0030-0.010 |
The following table shows the physical properties of Nimonic 105™.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.01 g/cm³ | 0.289 lb/in³ |
| Melting point | 1327°C | 2420°F |
The mechanical properties of Nimonic 105™ are displayed in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength (precipitation hardened, value at room temperature) | 1150 MPa | 167000 psi |
| Yield strength (precipitation hardened, value at room temperature, @strain 0.200%) | 770 MPa | 112000 psi |
| Elongation at break (precipitation hardened) | 25% | 25% |
The thermal properties of Nimonic 105™ are given in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Thermal expansion co-efficient (@20-100°C/68-212°F) | 12.2 µm/m°C | 6.78 µin/in°F |
| Thermal conductivity | 10.89 W/mK | 75.58 BTU in/hr.ft².°F |
Additional Information:
- Production Capacity: 10000
- Delivery Time: Ready Stock
- Packaging Details: Export packaging
View Complete details
EXPLORE MORE CATEGORIES