KHATTAR GALI,, Mumbai, Maharashtra
GST No. 27AASHM3103L1ZX
Call 08043851501 86% Response Rate
Minimum Order Quantity: 1 Kg
Product Brochure
Unit Length | Any Size |
Shape | Round |
Material Grade | Nimonic 75 |
Single Piece Length | Any Size |
Diameter | 5mm to 350mm |
Usage/Application | Industrial |
I Deal In | New Only |
NIMONIC alloys are made up of nickel and chromium. These alloys are characterised by their high-temperature low-creep and high performance. Additives like titanium and aluminium are used for enhancing the strength of the alloy. The NIMONIC alloy was first developed during the 1940s in England.
NIMONIC alloys that are available commercially are NIMONIC 75. NIMONIC 90, NIMONIC 100, NIMONIC 80A, 81, 86, NIMONIC 90, NIMONIC PE11 and 16. The NIMONIC alloy 75 is an 80/20 nickel-chromium alloy containing titanium and carbon as additives. This alloy was first introduced for use as turbine blades during the 1940s. It is readily fabricated and welded. This alloy exhibits good corrosion resistance, mechanical properties and heat resistance. Some of the standard forms in which this alloy is available are extruded section, hexagon flats, pipe, plate, strip and wire.
This datasheet will look into the chemical composition, properties and applications of NIMONIC alloy 75.
Chemical CompositionThe chemical composition of NIMONIC alloy 75 is given in the following table.
Element | Content (%) |
---|---|
Nickel, Ni | Remainder |
Chromium, Cr | 18-21 |
Iron, Fe | 5.00 max |
Silicon, Si | 1.00 max |
Manganese, Mn | 1.00 max |
Titanium, Ti | 0.2-0.6 |
Copper, Cu | 0.5 |
Carbon, C | 0.08-0.15 |
The following table discusses the physical properties of NIMONIC alloy 75.
Properties | Metric | Imperial |
---|---|---|
Density | 8.37 gm/cm3 | 0.302 lb/in3 |
The mechanical properties of NIMONIC alloy 75 are tabulated below.
Properties | Metric | Imperial |
---|---|---|
Tensile strength(annealed) | 750 MPa | 109 ksi |
Yield strength(annealed) | 275 MPa | 40 ksi |
Elongation at Break | 42% | 42% |
Modulus of Elasticity | 206 GPa | 29878 ksi |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Kg
Unit Length | As Per Requirement |
Size | 0.1 to 5mm |
Material | Nimonic 75 |
Material Grade | Nimonic 75 |
Single Piece Length | Any Size |
Diameter | 0.1 to 5mm |
Usage/Application | Industrial |
I Deal In | New Only |
NIMONIC alloys are made up of nickel and chromium. These alloys are characterised by their high-temperature low-creep and high performance. Additives like titanium and aluminium are used for enhancing the strength of the alloy. The NIMONIC alloy was first developed during the 1940s in England.
NIMONIC alloys that are available commercially are NIMONIC 75. NIMONIC 90, NIMONIC 100, NIMONIC 80A, 81, 86, NIMONIC 90, NIMONIC PE11 and 16. The NIMONIC alloy 75 is an 80/20 nickel-chromium alloy containing titanium and carbon as additives. This alloy was first introduced for use as turbine blades during the 1940s. It is readily fabricated and welded. This alloy exhibits good corrosion resistance, mechanical properties and heat resistance. Some of the standard forms in which this alloy is available are extruded section, hexagon flats, pipe, plate, strip and wire.
The NIMONIC alloy 75 is used in the following applications:
Additional Information:
View Complete details
Minimum Order Quantity: 1 Kg
Unit Length | As Per Requirement |
Size | 0.1 to 5mm |
Material | Nimonic 90 |
Shape | wire |
Material Grade | Nimonic 90 |
Single Piece Length | Any Size |
Diameter | 0.1 to 5mm |
Usage/Application | Industrial |
I Deal In | New Only |
Super alloys have good creep and oxidation resistance, and can be formed in different shapes. They contain a number of elements in a variety of combinations to achieve the desired result, and can function at very high temperatures and mechanical stress. They are classified into three groups such as nickel-based, iron-based and cobalt-based alloys.
Nimonic 90™ is a nickel-chromium-cobalt alloy which can be strengthened by adding aluminum and titanium.
Nimonic 90™ is used in high temperature and strength gas turbine components
Additional Information:
View Complete details
Minimum Order Quantity: 1 Kg
Product Brochure
Size | 0.1mm to 100mm |
Usage/Application | Industrial |
Shape | Rectangular |
Brand | As per requirement |
Material Grade | Hastelloy X |
Material | Hastelloy X |
I Deal In | New Only |
Magellan Metals offers Hastelloy X® in a variety of forms, including:
Additional Information:
View Complete details
Minimum Order Quantity: 1 Kg
Product Brochure
Material | Inconel 925 |
Material Grade | 925 |
Shape | Round |
Size | 5MM TO 350MM DIA |
Usage/Application | Industrial |
Standard | ASTM A276 A484 A479 A580 A582 JIS G4303 JIS G4311 DIN 1654-5 DIN 17440 GB/T 1220 |
Type | Bar |
Grade | Inconel 925 |
Single Piece Length | As per requirement |
Alloy 925 is an age hardenable nickel based alloy that contains chromium and iron. Its composition offers a high level of strength and corrosion resistance. Often sold as Inconel® 925, alloy 925, it is known for a number of different unique properties including:
Many different industries rely on Alloy 925 for a number of uses including:
Inconel® 925 and Alloy 925 have a unique chemical composition that includes:
We are a supplier of Nickel Alloy 925 and Inconel® 925 in pipe, tube, sheet, strip, plate, round bar, flat bar, forging stock, hexagon, wire, and extruded section.
All of the mills we source Alloy 925 from meet or exceed many of the leading industry standards including those from ASTM, ASME, SAE, AMS, ISO, DIN, EN, and BS.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Kg
Product Brochure
Material Grade | 904L |
Usage/Application | Industry |
Single Piece Length | As Per Requirement |
Shape | Round |
Size | 0.5mm to 350mm |
Packaging Type | Export Packaging |
I Deal In | New Only |
Material | SS |
Customisation | Customised |
Material Standard | ASTM A213 ASTM A269 ASTM A312 BS EN 10216 pt.5 |
Fe, <0.02% C, 19-23% Cr, 23-28% Ni, 4-5% Mo, <2.0% Mn, <1.0% Si, <0.045% P, <0.035% S, 1.0-2.0% Cu
IntroductionGrade 904L stainless steel is a non-stabilized austenitic stainless steel with low carbon content. This high alloy stainless steel is added with copper to improve its resistance to strong reducing acids, such as sulphuric acid. The steel is also resistant to stress corrosion cracking and crevice corrosion. Grade 904L is non-magnetic, and offers excellent formability, toughness and weldability.
Grade 904L contains high amounts of expensive ingredients, such as molybdenum and nickel. Today, most of the applications that employ grade 904L are replaced by low-cost duplex stainless steel 2205
ApplicationsSome of the major applications of grade 904L stainless steels include:
Additional Information:
View Complete details
Minimum Order Quantity: 1 Kg
Product Brochure
Material | High Nickel |
Thickness | 0.1mm to 100mm |
Usage/Application | Industry |
Steel Grade | Inconel X750 |
Shape | As per requirement |
Material Grade | Inconel X750 |
Plate Type | Inconel Plate, Thin sheet, Nickel Plate |
Standard | ASTM B163 ASTM B167 AMS 5580 BS 3074 |
Size | As per requirement |
Inconel | X750 |
I Deal In | New Only |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Kg
Product Brochure
Usage/Application | Industrial |
Material | Monel |
Form | Round wire form |
I Deal In | New Only |
Steel Grade | Monel 400 |
Product Grade | Monel 400 |
Length | As per requirement |
Packaging Type | Export Packaging |
Shape | Wire |
Monel 400 (Ni 67%) is made of a Nickel-Copper alloy that offers outstanding corrosion resistance in seawater. Monel 400 better withstands oxidation attack as compare to other copper based alloys and significantly prevents attack by sulfuric acid, hydrofluoric acid, hydrochloric acid, nitric acid, hydrofluoric acid and alkalis. It offers outstanding resistance to steam and has good toughness that makes it an ideal material for use in the oil refining industries.
Monel alloy 400 can retain its hardness at the various temperature limits. In annealed condition, monel alloy can be used up to 1000oF or 480oC. It has medium to high strength, fine weldability and exceptional mechanical characteristics at subzero temperatures. Alloy 400 is more economical and superior than Nickel.
Monel 400 is widely produced in the forms-Monel 400 wire, Monel 400 bar and Monel 400 plate.
Monel 400 WireHeanjia is a popular supplier of Monel wire for fishing and marine industry. Our Monel wire is known for its tight tolerance, smooth surface and uniformity throughout the length. In order to meet the demands of our potential clients, we offer the Monel wires in various dimensions such as in diameter 0.03 mm – 12 mm and shapes such as flat, square and shaped wires. Monel 400 wire is perfect to withstand internal or external corrosive environments.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Kg
Product Brochure
Material Grade | Inconel 718 |
Material | Inconel 718 |
Grade | Inconel 718 |
Usage/Application | Dairy Pipe, Oil Pipe, Gas Pipe, Fluid Pipe, Boiler Pipe for Chemical Industry |
Size/Diameter | As per Requirement |
Standard | ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB |
Single Piece Length | 3 meter |
Product Type | Inconel 718 |
Surface Finishing | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror fi |
End | Plain End, Beveled End |
Diameter | 5.0mm to 203.2mm |
Is It ISO Certified | ISO Certified |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Size | As per requirement |
Material | Hastelloy |
Fitting Type | All |
Type | As per requirement |
Usage/Application | Industry |
Schedule | All |
Material Grade | Hastelloy |
Grade | Hastelloy |
Is It ISO Certified | ISO Certified |
I Deal In | New Only |
Alloy C22 Pipe Bends are used to turn the pipe in the desired direction and contain chromium that helps in resisting oxidization. Hastelloy C22 Fittings are also said to resist stress related corrosion cracking. Alloy C-276 Fittings are widely used in food processing equipment, pickling components, plate heat exchangers, and sulfur oxide cooling towers. Furthermore, Hastelloy Buttweld Fittings are also used in marine and nuclear processing,heat exchangers, chemical processing, and sulfonating systems. Hastelloy Elbow is therefore used in high temperature applications.
Werkstoff Nr. 2.4602 Tee supplied by us are of high quality and are thus reliable and durable. They can also resist solutions containing nitric acid. Moreover, UNS N06022 Reducer can also resist environments that consist of ferric and cupric chloride, acetic and formic acid, brine water, and seawater. ASTM B366 Hastelloy End Cap is widely used in closing the pipe ends in the marine environment. Nickel Alloy Long Radius Elbow supplied by us is passed through various destructive and non-destructive tests that help in ensuring that the fittings have maintained the high quality and inherited the properties of the alloy or metal that it is made up of.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Kg
Grade | Inconel 800 |
Usage/Application | Industrial |
Product Type | Inconel 800 |
Number Of Holes | As per requirement |
I Deal In | New Only |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Kg
Grade | Inconel 825 |
Usage/Application | Industrial |
Product Type | Inconel 825 |
Number Of Holes | As per requirement |
I Deal In | New Only |
We are offering Incoloy 825 Flanges which is widely suitable for many industries including off-shore oil drilling companies, power generation, gas processing, pharmaceuticals, petrochemicals, pulp and paper industry, seawater equipment, pharmaceutical industries, heat exchangers, condensers etc. This superior range of flanges is available in ready stock to complete the urgent demands of our valued clients. We are providing Incoloy 825 Flanges at very affordable rates.
Our company is supplying Incoloy 825 Flanges having outstanding features such as high tensile strength, perfect dimensional accuracy, flawless surface finish, high durability, toughness, less maintenance and long-lastingness. Due to these quality features, Incoloy 825 Flanges are high in demand in the global industrial market. Our packaging team ensures to use adequate material to protect flanges from any damage and rust during the transit. There are numerous shipping options available as per the locations of our worldwide clients.
Additional Information:
View Complete details