Tough Alloys

Alloy 20 is austenitic stainless steel, which is highly resistant to corrosion and oxidation. The Alloy 20 Round Bar is made up of a chemical composition of chromium, molybdenum, copper, iron, nickel, and niobium, which helps stabilize the entire grade. These bars are available in sizes between 4mm to 350mm and lengths up to 3000mm. They are widely used in pharmaceuticals, chemical industries, food processing, industrial fluid handling, petroleum refineries, etc. The ASTM B473 UNS N08020 Rod possesses superior strength. These rods are designed with a minimum tensile strength of 551Mpa and a minimum yield strength of 241Mpa. We are the top Alloy 20 Round Bar Supplier in India. Our mission is to supply high-quality products at reasonable rates for all.

An Alloy 200 Square Bar is designed with a density of 8.1 g/cm3. These bars possess a melting point of about 1443 degrees C. They can be elongated by 30% and still possess excellent workability. DIN 2.4660 Flat Bar is used as support in various architectural and structural systems. These bars are available in different thicknesses and sizes. They are very durable and have a long service life. The Nickel Alloy 20 Hex bar shows good resistance against pitting and crevice corrosion in different mediums. Our experienced workers make use of the latest technology and best raw materials to produce all our products.

The Alloy 20 Round Bar Price depends on the thickness and length of the bar of your choosing. These bars may be available for Rs 1,200 per kilogram. For accurate pricing head, over to our nearest outlet. All our products can be grooved, cut, and customized as per your requirements. If you have any queries about our products, feel free to contact us.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

NIMONIC alloys are primarily composed of nickel and chromium. These alloys are known for their high-temperature low-creep and high performance. Additives like aluminium, carbon and titanium are infused into the alloy. The NIMONIC alloy was first developed in 1940 in England. NIMONIC alloys available commercially are NIMONIC 75, NIMONIC 80A, 81, 86, NIMONIC PE11 and 16.

NIMONIC alloy 80A is a wrought, age-hardened alloy that is strengthened by additives like titanium, aluminium and carbon. It is manufactured by high-frequency melting and casting in air. It is similar to NIMONIC alloy 75. It has good corrosion and oxidation resistance. The creep rupture and tensile properties are high at 815°C (1500°F).

This datasheet will look into the chemical composition, properties and applications of NIMONIC alloy 80A.

Chemical Composition

The chemical composition of NIMONIC alloy 80A is given in the following table.

Physical Properties

The following table discusses the physical properties of NIMONIC alloy 80A.

Mechanical Properties

The mechanical properties of NIMONIC alloy 80A are tabulated below.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export packaging

Super alloys have good creep and oxidation resistance, and can be formed in different shapes. They contain a number of elements in a variety of combinations to achieve the desired result, and can function at very high temperatures and mechanical stress. They are classified into three groups such as nickel-based, iron-based and cobalt-based alloys.

Nimonic 90™ is a nickel-chromium-cobalt alloy which can be strengthened by adding aluminum and titanium.

Chemical Composition

The following table shows the chemical composition of Nimonic 90™.

Physical Properties

The physical properties of Nimonic 90™ are outlined in the following table.

Thermal Properties

The thermal properties of Nimonic 90™ are given in the following table.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

Super alloys are also called high performance alloys. They contain a number of elements in a variety of combinations to reach the desired result. These alloys can function in environments with high temperatures and severe mechanical stress, and also in cases where high surface stability is needed. Super alloys have good creep and oxidation resistance.

Strengthening of super alloys is performed by work hardening, solid-solution hardening, and precipitation hardening methods.

Nimonic Alloy 263™ is a British nickel-chromium-cobalt-molybdenum alloy specially meant for use in high temperature and high strength applications. This alloy can be precipitation-hardened.

The following datasheet will provide more details about Nimonic Alloy 263™.

Chemical Composition

The following table shows the chemical composition of Nimonic Alloy 263™.

Physical Properties

The physical properties of Nimonic Alloy 263™ are outlined in the following table.

Mechanical Properties

The mechanical properties of Nimonic Alloy 263™ are provided below.

Thermal Properties

The thermal properties of Nimonic Alloy 263™ are given below.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

Inconel wire is made for applications in high temperatures up to 2000oF. Inconel wires are oxidation and corrosion resistant materials with strength to perform at a wide range of temperatures. Due to these properties, Inconel wires are preferably used over steel. They have main applications in energy, heat treating plants, chemical industry, pharmaceutical, aerospace and nuclear engineering. Inconel alloys are resistant to organic and inorganic compounds, chloride ion stress-corrosion cracking and alkaline solutions.

We produce Inconel wire in grades- Inconel 600, Inconel 601, Inconel 625, Inconel 718 and Inconel X-750.

Inconel 600 is a non-magnetic alloy that is used in the diverse corrosion resistant applications for offering exceptional resistance to chloride based stress corrosion cracking. It is fit for use in high temperature media up to 2150oF. It is usually specified for applications in nuclear steam generator, heat processing baskets, fixtures, trays and furnace muffles, chemical and food processing units.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

Incoloy Alloy 800H/800HT are a controlled composition alloy, used in applications that need high temperature creeping resistance. They offer good resistance in the variety of acidic and sulfur containing media. The blend of mechanical and thermal processing enables Nickel 800H/HT to tolerate higher stresses than those of traditional alloys.

Alloy 800H is a solution heat processed metallic material with limited carbon content than alloy 800. It offers higher elevated temperature characteristics and has better creeping and stress rupture properties at the temperature limits up to 1100oF – 1800oF or 593oC to 982oC.

The chemistry of Incoloy 800H/800HT provides outstanding resistance to carburization, oxidation and nitridation conditions. They are not susceptible to embrittlement even after prolong operations up to 1200oF to 1600oF. At this temperature range, many stainless steels exhibit brittleness.

Incoloy 800H/800HT Applications

Alloy 800H/HT are commonly used in applications that include high temperature corrosive media such as in Ethylene Pyrolysis, hydrocarbon cracking, furnaces for vinyl chloride diphenol and acetic acid, valves, fittings and other fixtures.  They are used in power production, superheater, petrochemical industries, heat processing retorts, muffles jigs, baskets, trays, components, refineries, tubings for oil refining units, electric range heating-element enclosing, ammonia effluent coolers, extruded tubing

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

Inconel 617 is a solid solution NiCrCoMo alloy offering exclusive blend of high temperature strength and oxidation resistance. Excellent corrosion resistance in a variety of conditions. It can be easily forged and welded by traditional methods.

Availability of high nickel and chromium magnitudes feature alloy 617 with outstanding resistance to oxidation and reduction conditions at the elevated temperatures.

Inconel 617 offers high strength and oxidation resistance up to 1800oF that make it an ideal material for aircraft and land based gas turbines. The alloy has good pitting and crevice corrosion resistance.

Inconel 617 a high temperature nickel alloy is fit for use in the power production units for its creeping resistance and good fabricability properties. It is used in industrial gas turbines and furnaces for its finest working, welding and creeping resistance properties.

Inconel 617 has lower density as compare to tungsten based alloys. It attains exceptionally high metallurgical stability that even after prolong elevated temperature exposure it doesn’t cause formation of embrittling phases.

The presence of nickel, chromium and aluminum elements provides great resistance to carburization at the high temperatures. It can also withstand various aqueous corrosive conditions. At high temperatures, chromium and aluminum result in the development of thin and adherent oxide layer that prevents spalling and offers moderate to good resistance to various reducing and oxidizing acids such as hydrochloric acid, hydrofluoric acid, sulfuric acid and nitric acid.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

The round bars are long and cylindrical metal bars that have many industrial and commercial applications.

Inconel 625 alloy consists of nickel, chromium, and molybdenum in the composition, along with niobium. The molybdenum, along with niobium, helps the Inconel 625 Round Bar to have high strength without any strengthening heat-treatment process.

The Inconel 625 Round Bar offers extreme resistance to corrosion in various and extremely corrosive environments. Being one of the top Inconel round bar Suppliers, we can assure that the Inconel 625 material is high in durability and toughness.

The Alloy 625 Rod is also known for its resistance to crevice corrosion and pitting. Apart from these, the Uns N06625 Hex Bar also has high fatigue strength and is resistant to stress corrosion cracking to chloride ions. The Inconel 625 Forged Bar is also resistant to caustics.

We manufacture Nickel Alloy 625 Square Bar under all international standards.

 

Various industries like chemical processing, marine engineering, nuclear and pollution control equipment use our 625 Alloy bright bar for different applications.

The Alloy 625 cold drawn bar can serve in extreme environments depending on the amount of heat and pressure. It is one of the main reasons behind the popularity of these bars across industries. During the heat treatment, the 625 Inconel Alloy Hot rolled bar forms a thick and stable oxide layer around itself, which helps to protect the surface from different attacks.

We have clients demanding Inconel 625 Round Bar from different parts of the world; hence we take extra care of the packaging. 

No matter how big or small the consignment is, we will always take care of the Inconel 625 Hex Bar until it reaches your doorstep.

To ensure the quality and safety of our 2.4856 Alloy 625 Rod, we conduct several quality checks on them. These are held in government-approved labs, and third parties do the tests. Only on receiving proper certification will we proceed with delivering the UNS N06625 Bright Bar to our esteemed clients.

We have a vast ASTM B446 UNS N06625 Bar Stock, and hence clients can contact us with their requirements for faster deliveries. If the required size of the Inconel 625 Square bar is not available with us instantly, we can customize it according to the given specification.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready stock
• Packaging Details: Export packaging

Inconel 601 is an alloy composed of nickel and chromium. The Inconel 601 Round Bar exhibit superior strength and excellent corrosion resistance properties. These bars can suffice well in extreme temperature systems of up to 1250 degrees C and don’t easily deform or dissociate under any pressures. The Alloy Inconel 601 hot rolled bar is produced by processing at high temperatures of above 2000 degrees C in mills. These bars possess good dimensional accuracy. They are resistant against cyclic and thermal cooling as well as heating. The Nickel Alloy 61 Cold Finished Bar is formed after the hot-rolling process comes to an end. These bars can be enhanced to possess a smooth and aesthetic finish. They can also possess refined properties which are suitable for various applications. The Inconel 6601 Square Bar possesses superior mechanical properties. They have a minimum tensile strength of 550Mpa and minimum yield strength of 205Mpa. They can be easily machined and elongated by 30%. We are the leading Inconel 601 Round Bars supplier in India. We thrive to produce top-quality products at the most feasible rates.

 

The Uns N06601 Hex Bar is designed with a standard density of 8.1 g/cm3. These bars possess a melting point of up to 1411 degrees C. The six-sided bar is welded on the interior to give it the correct shape and accurate dimensions. 

hese bars are easy to maintain and can suffice for long periods. They can be availed in thicknesses between 2mm to 100mm. The Inconel Alloy 601 Bright bar possesses accurate dimensions and enhanced tolerances. They possess a smooth and shiny surface which gives them an aesthetic appearance. These bars can be easily drawn in square, circular, rectangular, hexagonal, and other shapes. We are the Inconel 601 Round Bar suppliers who can customize all our products in different shapes, sizes, and chemical make-up.

The Alloy 601 Rod shows resistance in aqueous mediums. These rods are produced following all ASME, ASTM, and API standards. They can be availed in different finishes, dimensions, and schedules at any of our outlets. The Inconel 601 Bar stock is used in many industrial systems for manufacturing different products. Our renowned workers make use of the best raw materials and cutting-edge technology to produce all our products. If you have any queries about our products, contact us to know more.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready stock
• Packaging Details: Export Packaging

Inconel 600 belongs to a family of austenitic superalloys. The Inconel 600 Round Bar is made with a chemical composition comprising of carbon, nickel, manganese, silicon, ferrous, sulfur, chromium, and copper. These bars possess superior strength and are resistant to corrosion and erosion in stress-induced environments. The Alloy 600 Rod doesn’t deform or dissociate easily under extreme pressures and elevated temperatures. These rods are available in standard sizes between 5mm to 500mm which can be customized on request. The UNS N06600 Hex bar possesses good mechanical properties and enhanced hardness. These bars possess a minimum tensile strength of 655Mpa and a minimum yield strength of 310Mpa. They can be elongated by 40% and still exhibit excellent machinability. We are the top Inconel 600 Round Bar suppliers in the country. Our goal is to supply high-quality products to all our clients at reasonable rates.

 

The Nickel Alloy 600 Square Bar is widely used in industrial set-ups. These bars are in demand as they can be employed in general repairs, manufacturing, and general assembly. They are available in sizes between 4mm to 100mm. 

 These bars act as supporting materials and are used in different structural and architectural applications. This Inconel 600 Flat Bar is very reliable in stress-induced environments. These bars are available in standard thicknesses up to 100mm and widths between 10mm to 500mm. The Inconel Alloy 600 Forged Bar is designed with superior ductility, fatigue, and impact strength. These bars are stronger, and reliable compared to bars that are cast. All our products are produced following international and national standards set by different unions.

The Inconel Alloy 6600 Hot rolled bar is immune against chloride ion stressing in different systems. These bars are processed at high temperatures which, gives them good dimensional accuracy and excellent tolerances. The 600 Inconel cold drawn bar is processed after the hot-rolling process. These bars can be rolled in different dimensions and tolerances as per requirements. Apart from this, they exhibit a smooth and aesthetic surface finish. All our products including, the AMS 5665 Rod, can be customized in different chemical make-up, shapes, and sizes as per the requirements of our clients. If you have any queries or want to know more about our products, feel free to contact us.

 

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready stock
• Packaging Details: Export packaging

The Incoloy 800 alloy has nickel, iron, and chromium as its main elements, and the chemical composition gives it unique mechanical properties. The Incoloy 800 Round Bar is hot-finished and comes with high tensile strength. The Incoloy 800H Round Bar is also known for its resistance to oxidation and carburization, even at high temperatures. It means that these bars are perfect for elevated temperature applications. This property makes the Incoloy 800HT Round Bar popular in the petrochemical industry. The presence of the nickel element in the alloy helps to increase its resistance to chloride-ion stress corrosion cracking, which is indeed an essential feature of the Alloy 800h Rod.

 

We are a renowned Incoloy 800 Round Bar manufacturer. We carry out its forging within a temperature range of 2200 degrees F to 1600 degrees F. Formation of chromium carbide precipitate on the Inconel Alloy 800ht Hex Bar is also quite common. It falls in the temperature range of 1400 degrees F to 1000 degrees F. Hence; it becomes essential to cool the parts rapidly through this temperature range. The Uns N08800 Flat Bar is available in a heat-treated and controlled carbon version, which shows better mechanical properties at elevated temperatures.

Clients who want to buy customized and high-quality Nickel Alloy 800h Square Bar at affordable prices can contact us immediately. We use the best raw material and technically advanced equipment while manufacturing Incoloy 800ht forged Bar, making our product dimensionally accurate. Clients in urgent need of Alloy 800 Bright Bar can call us as we have a vast stock. If the required size is not available, we will easily customize it according to the specification given.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready stock
• Packaging Details: Export packaging

The Incoloy 825 alloy consists of nickel, chromium, and iron in the chemical composition along with titanium, copper, and molybdenum. The Incoloy 825 Round Bar is popular for its high resistance in many chemically corrosive environments. The Incoloy 825 Round Bar is primarily known for providing excellent resistance to crevice corrosion, pitting, stress corrosion cracking, and intergranular corrosion. The presence of chromium in the Inconel 825 round bar improves its resistance against various oxidizing salts, nitrates, and nitric acids. Proper heat treating the titanium-based Nickel Alloy 825 Rod helps to stabilize it against intergranular corrosion sensitization.

 

The UNS N08825 Square Bar is known for its resistance against localized and general corrosion in a wide range of environments. The excellent mechanical properties of Din 2.4858 Flat Bar make it appealing for different industries like nuclear fuel processing, pollution control, acid production, etc. The 825 Incoloy Hex Bar is also used in making equipment that handles radioactive waste. Our ASME SB425 UNS N08825 Square Bar goes through several quality and safety checks in government-approved labs conducted by third parties before they are delivered.

As a renowned Inco 825 Alloy Forged Bar manufacturer, we offer tested products and can conclude that they have similar applications as that of the Incoloy alloy 020. Clients searching for high-quality Inconel Alloy 825 bright bar at competitive prices can contact us. We offer full customization on the specific requirements given by our esteemed clients. We follow the standard shipping process and offer fast deliveries of ASTM B425 UNS N08825 Bar. Our products are dimensionally accurate, and they are made to cater to the particular requirements of our clients.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

Plates are made up of different metals, and alloys. Inconel is made up of nickel and chromium as the base elements. Inconel 625 Plate is corrosion resistant and high strength alloy. It is a non-magnetic alloy. Inconel Plate has good resistance to corrosion along with high strength even at cryogenic temperature. Inconel Sheet derives its solid solution hardening of nickel and chromium. Inconel 625 Plate Suppliers recommend these as precipitation hardening is not required. Inconel 625 Sheet resists corrosion in a severe operating environment. 2.4856 Plate offers resistance to oxidation and carburization at high temperatures.

SME SB 443 UNS 06625 in the annealed condition is said to be austenitic and are suitable for machining. Inconel Plate suppliers recommend the usage of these tubes due to the high fatigue strength and toughness. SB 443 UNS N06625is said to be resistant to crevice corrosion and pitting. Furthermore, ASTM B443 UNS N06625 can also resist intergranular attacks and impingement corrosion. UNS N06625 Plate is also immune to chloride stress corrosion cracking. Inconel 625 ASTM B443 can be welded and fabricated easily using conventional methods. Inconel 625 Shim Stockis said to maintain high tensile strength along with toughness. 

Alloy 625 Plate suppliers in India can either use gas metal arc or gas tungsten arc or electron beam for welding. Alloy 625 Plate is widely used in petroleum refining, water treatment, offshore oil and gas, marine service, and nuclear industry. Moreover, Alloy 625 Sheet is also used in aerospace components manufacturing, air pollution controlling equipment, jet engine exhaust system, and chemical processing. Alloy 625 Strip are used in reactor cores and control rods in the nuclear industry. Whereas, Inconel 625 Coil is used in submarine auxiliary propulsion systems, and streamlines bellows in the marine industry. Alloy 625 Foilis also used in chimney liners, dampers, and gas desulfurization applications. We have a huge warehouse facility that helps us in maintaining Inconel 625 Plate Stock. This inturn helps us in catering to large orders of Inconel 625 Lcf Sheet.

Additional Information:

• Item Code: Inconel625
• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export packaging

Inconel 601 grade is an engineering material, which has high tolerances in various mediums. The Inconel 601 Plate is made with good concertation of nickel and alloy which allows it to resist corrosion in temperatures up to 2200 degrees F. These plates have excellent ductility and retain it after long service hours. They are available in sizes between 0.5mm to 76.2mm. The Inconel Alloy 601 Sheet exhibits excellent mechanical properties and superior hardness. These sheets possess a minimum tensile strength of 650Mpa and minimum yield strength of 300Mpa. They can be elongated by 30% and still possess good workability. UNS N06601 Strip is used in various industries where strength and precision are very important. These strips are very versatile and can be welded and machined with ease. We are the leading Inconel 601 Plate suppliers. We aim to supply the best products, which are available at reasonable rates.

 

The Alloy 601 Coil is produced with a density of 8.1 g/cm3. These coils have a melting point in the range of 1320-1370 degrees C. They are available in different schedules and thicknesses. DIN 2.4851 Sheet Coil is highly resistant against carburization. These coils perform well under severe thermal and cyclic conditions. They are very durable and can suffice for long periods. A Nickel Alloy 601 Shim sheet is a thin strip of sheet, which provides structural support to the system. These sheets can be installed in washers to allow material to be fixed easily and reduce wear. The Inconel 601 Sheet can be customized like all our products in different chemical compositions, shapes, and sizes as per the requirements of our clients.

The Inconel 6601 Hot Rolled Plate is processed at high temperatures in mills. These plates possess good strength and are known for their excellent dimensional accuracy. The Inconel 601 Cold Rolled Plate is formed after the hot-rolling process. These plates possess an enhanced surface finish and superior chemical properties. All our products are produced using cutting-edge technology and the best raw materials. If you have any queries or want to get a quote on our products, contact us to know more.

Additional Information:

• Item Code: Inconel601
• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

Inconel is an austenitic grade of stainless steel. It is used to produce various products and is divided into various grades depending upon the properties inherited by it. Inconel 600 Plate is one such type of product that has non-magnetic properties. They resist general corrosion such as pitting and crevice. Moreover, these Nickel Alloy 600 Sheets also offer the ability to heat or cold form. They provide resistance to stress related corrosion and aging in annealed as well as heavily cold worked range. UNS N06600 Strip thus avoids chloride ion stress corrosion cracking. 

ASTM B168 UNS N06600 is also said to be resistant to oxidation. Hence it is suitable for applications and services that are prone to oxidation. This is in the case of services and applications that are exposed to high temperatures or pressure. 2.4816 Foil forms a thick layer of stable and passivated oxide when heated. This layer protects the metal from further corrosion attacks. Since Inconel Alloy 600 Coil displayed good tensile strength over a range of temperature it is demanded by customers for high temperature applications. This is because the thermally induced crystal vacancies tend to fail aluminum and conventional steel against creep.

UNS N06600 Hot Rolled Plate has a high tensile strength since they are treated with solution strengthening process and precipitation hardening process. The high resistance to oxidation is due to the content of chromium in it whereas the resistance to corrosion in Inconel 600 Cold Rolled Plate is due to the high content of base element nickel. We have been producing and supplying these plates for generations now. Our products are manufactured and supplied as per the international standard. This helps us to supply Alloy 600 Shim Sheet to our international customers and to cater to large orders.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

Alloy 800 is an austenitic steel, which is made with high concentrations of nickel. The Incoloy 800 Plate has a chemical composition of carbon, nickel, chromium, molybdenum, silicon, sulfur, copper, ferrous, aluminum, and titanium. These plates exhibit high corrosion and oxidation resistance in all types of mediums. Inconel 800 Sheet is designed with excellent mechanical properties. These sheets have a minimum tensile strength of 520Mpa and a minimum yield strength of 205Mpa. The Inconel 800 Plate is highly versatile and widely used in thermal power plants, chemical industries, boilers, heat exchangers, condensers, nuclear fuel, and so on. We are the leading Incoloy 800 Plate supplier in the country. Our goal is to supply high-quality products, which are available at feasible rates for all.

 

The Alloy 800 Coil can suffice in high temperatures up to 700 degrees C. These coils possess excellent creep-rupture properties and remain ductile for long periods. The coils can be easily elongated by 30% and still have excellent workability. Incoloy Alloy 800 Sheet Coil is designed with a density of 7.94g/cm3. These sheet coils can be galvanized to improve their overall tolerances and resistance against corrosion. The UNS N08800 Strip is designed with superior strength and enhanced creep resistance properties. These strips are available in thickness between 1000mm to 2500mm. UNS N08800 Shim Stock is used to provide structural support to various types of equipment in many industries. All our products are produced using cutting-edge technology and the best raw material following all industrial guidelines.

The Nickel Alloy 800 Hot Rolled Plate is produced by processing steel at high temperatures. These plates are very reliable and are known for their good dimensional accuracy. The DIN 1.4876 Cold Rolled Plate is formed after the hot-rolling process. These plates possess a superior surface finish and enhanced hardness and chemical make-up. They are also immune to acid-induced metal cracking. An AMS 5871 Polished Plate gives an aesthetic appearance to the observer due to its superior finish. As a result, these plates provide extra protection in corrosive and oxidative mediums. All our products including, the Nickel Incoloy 800 Sheet, can be customized as per your requirements with desired chemical makeup, shapes, and sizes. If you have any questions about our products or want to get a quote on

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

The Incoloy 800H alloy has nickel, iron, and chromium and is a part of the 800 series alloy family. This means that one would get similar characteristics of the 800 alloys in the Incoloy 800H Plate. For example, it has increased resistance to corrosion when exposed to elevated temperatures. The Incoloy 800H Plate also comes with various other mechanical characteristics, like they have excellent resistance to oxidation, carburization, and sulfidation. The added carbon, along with the annealing treatment, also increases the creep rupture strength of the Inconel 800h Plate. They also have high machinability, which means the ASTM B409 UNS N08810 can be machined using standard technologies. It can also be easily welded using products at an elevated temperature environment. At moderate temperature, the SB 409 N08810 material offers good resistance to aqueous corrosion.everal industries worldwide purchase SB 409 Alloy 800h plates from us and use them for different applications. The Incoloy 800H Strip can efficiently be used in the industrial furnace component, chemical processing, pressure vessels, hydrocarbon cracking, heat treatment, etc. At Steel Tubes India, we use the best quality SB 409 UNS N08810 material to produce different products like plates, strips, bars, etc. All our products are superior in quality and have dimensional accuracy.Clients can contact us to buy Incoloy 800H Sheet at the best prices. We produce the Alloy 800h Plate following the industrial standards. We offer fast and doorstep deliveries for our customer’s convenience.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

The Monel 400 alloy consists of nickel and copper and is primarily known for resisting corrosion caused due to seawater. The Monel 400 Pipe is also resistant to other corrosion due to acids and other media. Due to its unique mechanical properties, the Monel 400 Pipe is widely used in various marine applications, piping systems, seawater valves, etc. One can also find a huge Monel 400 Seamless Pipe application in the crude oil distillation tower, chemical plant equipment, etc. Being one of India's top Monel Pipe suppliers, we can state that pipe is hardened only by cold working. The Alloy 400 Pipe also exhibits high strength and excellent weldability and is greatly resistant to corrosion. However, the ASME SB 165 UNS N04400 material has low machinability. The Monel material hardens during machining, and hence the conventional machining procedures used on the iron alloy are used in this one.

Even though the ASTM B165 UNS N04400 material has low strength in the annealed condition, it displays excellent mechanical properties even at sub-zero temperatures. The Monel Pipe can be used up to a temperature of 1000 degrees F. To enhance the mechanical properties of the Monel 400 Welded Pipe, finished fabrication can be done on it. Controlling the amount of hot working or cold working along with a proper selection of thermal treatments can also improve the properties of the Monel Seamless Pipe.

Cleaning the alloy is an essential part for the Monel 400 Pipe suppliers, or else it will not show the optimum resistance capability to corrosion. In case the Monel Pipe material gets contaminated, it can become brittle. We customize the Monel Drill Pipe according to the specific requirements of our clients, maintaining dimensional accuracy. Once we know the requirements, we will show the Price of Monel Pipe as it varies with every order and depends on many factors.

Clients looking for a high-quality Monel Pipe for sale can contact us. We use premium material in the manufacturing process; hence the quality is always guaranteed. Customers who want to check our products' authenticity can have a look at the HS code of Monel Pipe manufactured by us.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Delivery
• Packaging Details: Export Packing

A nickel iron and chromium alloy are commonly used in manufacturing various tubes and plates. One such type is Incoloy 825 Tube. It has enhanced resistance to aqueous corrosion. 2.4858 Inconel 825 Tubes have good resistance to reducing and oxidizing acids. It is designed with a specific chemical composition that provides resistance to many corrosive environments such as phosphoric acid, sulfuric acid, sour gas, and oil wells. SB 163 UNS N08825 also provides chloride ion stress corrosion cracking. SB 163 UNS N08825 Alloy 825 Tubeis basically designed to be used in a general corrosive environment. UNS N08825 Tubing has a high chromium content which enables it to resist oxidizing substances, such as oxidizing salts, and nitric acids. Alloy 825 Welded Tubeis used for heat exchangers and condensers. They are either hot or cold finished. ASME Sb 163 UNS N08825 has titanium added to the alloy in trace amount this helps it to avoid intergranular corrosion. Incoloy 825 Seamless Tubingis used in applications that handle radioactive waste, pickling operations, nuclear fuel reprocessing, oil and gas recovery, and acid production. ASTM B163 UNS N08825is also used in chemical processing and pollution control. 

Alloy 825 heat exchanger tubesare said to be the most effective alloy in an environment containing sulfuric acid and are also pocket-friendly. Alloy 825 Exhaust Tubingis easy to weld and machine. ASME SB 163 N08825 Nickel 825 Coiled Tubing display strength in high temperature. We pass these Alloy 825 Seamless Tubing through various tests before supplying them to our customers. This ensures that they have retained the desired properties of the alloy. SB 163 UNS N08825 condensers manufactured by us are supplied at affordable prices this is due to the low cost of labor available in the country.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready stock
• Packaging Details: Export packaging

These alloy also has excellent rigidity to a wide range of corrosive environment, and it is readily formed and welded by conventional techniques. The high nickel contents make the alloy resistant to a variety of both reducing and oxidizing media. Solid-solution strengthening is imparted by the molydenum and cobalt.

This way we can service even the non standard sizes for immediate dispatch. One of the main reasons our brand resonates around the world is the kind of delivery we provide to our customers. If you want Very urgent delivery of inconel 617 roundbar even in odd size so Jignesh Steel can provide you due to our huge ready stock of inconel 617 roundbar.Alloy 617 Round bar(UNS N06617) is a solid solution, nickel-cobalt-chromium-molydenum alloy with an exceptional combination of high-temperature strength and oxidation resistance. The aluminum, in conjunction with the chromium, provides oxidation resistance at high temperatures. We have so many sizes in stock, if it is not with us; it is unlikely you will find it in stock anywhere. buying experience of inconel 617 roundbar with Jignesh Steel is what makes our client come back to us each time they purchase our products.

We can also provide free sample of Inconel 617 ASTM B166 Bar,if you are looking for best price of Inconel 617 round bar or ASTM B166 Inconel 617 Hex Bar, Alloy 617 Cold Drawn Round Bar near you with shortest time delivery or free sample of ASTM B166 Inconel 617 Hex Bar. 

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

Stainless steel alloy A286 is an austenitic temperature resistant incoloy material that provides high strength through the age hardening process. Due to its numerous beneficial features, Alloy A286 steel is ideal for fastener applications, manifold components in the oil & gas industry and superchargers, jet engines, fasteners and turbine components.

Tough Alloys is your trusted source for your A286 steel supply needs. We can supply you with a broad range of material format options to match your exact project requirements. Contact us for more information regarding temperature resistant A286 alloy steel.

Superalloy A286 Steel Material PropertiesAustenitic superalloy A286 can be hardened and strengthened by heat treatment and is used for applications at temperatures up to 1300° F. A286 stainless can also be used for lower stress applications at higher temperatures. Alloy a286 also maintains excellent high temperature oxidation resistance and is designed to maximize creep and stress rupture properties, with some reduction in strength.  A286 Alloy Industry ApplicationsDue to its inherent beneficial qualities, alloy A286 is commonly used for a wide range of applications, including:

• Frames
• Fasteners
• Wheels
• Blades
• Afterburner Parts
• Casings
• Sockets

Incoloy Superalloy Alloy A286 Format OptionsA286 Alloy stainless steel is available in several forms, including:

• Seamless & Welded Pipe
• Seamless & Welded Tube
• Bar
• Wire
• Sheet
• Plate
• Forgings
• Pipe Fittings
• Flanges

Magellan Metals is your premiere A286 stainless steel alloy supplier. Temperature Resistant Alloy A286 Material AdvantagesStainless steel A286 is a corrosion resistant austenitic iron-base material that displays a wide range of material benefits for industrial applications across the globe. Some of the main advantages that A286 alloy provides includes:

• Excellent temperature oxidation resistance
• Resistant to corrosion and oxidation
• Designed to maximize creep and stress rupture properties
• Can attain high strength levels when aged after cold work

Contact Tough Alloys for Stainless Steel A286 Alloy.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

Incoloy 825 is highly resistant to corrosion. It has a high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenite structure. The levels of molybdenum and copper enable the alloy to resist reducing agents and acids. Chromium gives resistance to oxidising conditions, such as nitric acid solutions, nitrates and oxidising salts. The alloy is titanium stabilised to resist pitting and intergranular attack after fabrication, particularly welding, which includes heating in the critical sensitisation temperature range (650°C – 760°C).

Alloy 825 offers exceptional resistance to corrosion by sulphuric and phosphoric acids and is often the most cost effective alloy in sulphuric acid service.

Austral Wright Metals can supply this alloy as plate, sheet, strip, bar, rod, wire, tube, pipe, fittings, fasteners.

Pressure Vessels

Incoloy 825 is approved for pressure vessel operating temperatures up to 525°C (AS1210, AS4041), 538°C (ASME Boiler & Pressure Vessel Code, Sections I, III, VIII, IX, Cases 1936, N-188). Brittle phases may form in alloy 825 at temperatures above ~ 540°C, so it is not normally used at these temperatures, where creep-rupture properties would be design factors.

Applications of Incoloy 825

Typical Applications of Incoloy Alloy 825 include:

• Sulphuric acid piping and vessels
• Phosphoric acid evaporators
• Pickling tank heaters, pickling tanks and equipment
• Chemical process equipment
• Propellor shafts
• Tank trucks
• Calorifiers
• Electrostatic precipitator electrodes
• Hot vessels for food, water and seawater,
• Ammonium sulphate vessels
• Expansion bellows
• Marine exhaust systems
• Power station ash hoppers

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready stock
• Packaging Details: Export Packaging

Super alloys or high performance alloys have good creep and oxidation resistance. They have an ability to function under high temperatures and mechanical stress. They are available in different shapes, and contain a number of elements in a variety of combinations to achieve the desired result. There are three groups of alloys namely cobalt-based, nickel-based, and iron-based alloys. All the three types can be used at temperatures above 540°C (1000°F).

Inconel 617™ is a solid-solution strengthened alloy, and has good oxidation resistance and a wide variety of corrosive media. The datasheet given below will discuss about Inconel 617™.

Fabrication and Heat TreatmentMachinability

Inconel 617™ is machined using conventional machining methods which are usually used for iron-based alloys. Machining operations are performed using commercial coolants. High-speed operations such as grinding, milling or turning, are performed using water-base coolants.

Forming

Inconel 617™ can be formed using all conventional techniques.

Welding

Inconel 617™ is welded using gas-tungsten arc welding, shielded metal-arc welding, gas metal-arc welding, and submerged-arc welding methods.

Heat Treatment

Inconel 617™ is heat treated by annealing at 1177°C (2150°F) followed by quenching in water or cooling in air for thinner sections.

Forging

Inconel 617™ is forged at 1010 to 1205°C (1850 to 2200°F).

Hot Working

Inconel 617™ is hot worked at 927 to 1205°C (1700 to 2200°F).

Cold Working

Inconel 617™ can be cold worked using standard tooling.

Annealing

Inconel 617™ is annealed at 1177°C (2150°F) followed by cooling.

Hardening

Inconel 617™ can be hardened by cold working.

Applications

 

Inconel 617™ is used in industrial furnace components and gas turbines for combustion cans and ducts.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

Applications

Springs operating from cryogenic temperatures up to 1300°F (704°C), fasteners and components requiring resistance to high temperature and corrosive environments.

Description

INCONEL Alloy X750 is a precipitation-hardenable Nickel-Chromium alloy with high strength at temperatures up to 1300°F (704°C) and oxidation resistance up to 1800°F (982°C). INCONEL Alloy X750 offers excellent resistance to relaxation and as a result it is widely used for springs operating at elevated temperatures.

Industries Supplied

Oil & Gas Extraction and Processing, Nuclear, Aerospace, Power Generation and Automotive

Nominal Composition

C: 0.08 max
Mn: 0.35 max
Si: 0.35 max
S: 0.010 max
Cr: 14.0 – 17.0
Nb: 0.70 – 1.20
Ti: 2.25 – 2.75
Al: 0.40 – 1.00
Fe: 5.00 – 9.00
Co: 1.0 max
Ta: 0.05 max
Cu: 0.50 max
Ni + Co: 70.0 min

Physical Properties

Density: 0.299 lb/in3, (8.28 g/cm3)

Modulus of Elasticity (E):
At 70°F (20°C): 31.0 x 103 ksi (214 GPa)

Modulus of Rigidity (G)
At 70°F (20°C):  12.0 x 103 ksi (82.7 GPa)

Coefficient of Expansion:
7.8 µin/in.-°F (70°F to 600°F)
14.5 µm/m-°C (20°C to 538°C)

Electrical Resistivity: 48.0 µΩ.in, (122 µΩ.cm)

 

Thermal Conductivity: 83 Btu-in/ft2hr-°F, (12.0 W/m-K)

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

Incoloy alloy is made up of different grades, which are produced following all ASME, ASTM, and API standards. The Incoloy 800HT Plate is made with high concentrations of nickel, chromium, and molybdenum in their concentrations. These plates show excellent resistance against corrosion, oxidation, sulfidation, and carburization. The Alloy 800HT Plate is designed with excellent mechanical properties. These plates possess a minimum tensile strength of 500Mpa and a minimum yield strength of 200Mpa. They can be elongated by 30-35% and still possess excellent workability. The 800HT Plate is highly versatile and widely used in thermal processing systems, petroleum refining, thermal power plants, chemical industries, petrochemical processing, etc. We are amongst the leading Incoloy 800HT Plate suppliers in Mumbai. Our mission is to supply high-quality products at the most reasonable rates.

 

The Sheet Alloy 800ht is designed with a density of 8.47 g/cm3. These alloys possess enhanced creep and rupture resistance properties. They can easily suffice in high temperatures up to 600 degrees C. The ASTM B409 UNS N08811 can be easily machined by standard procedures and is employed widely in sulfur-reducing environments. They show good resistance in aqueous conditions at moderate temperatures. ASME SB 409 UNS N08811 is very ductile and needs to be annealed for services, which are below the temperatures of 110 degrees F. They are easy to maintain and have a long service life. All our products including, the DIN 1.4959 Strips can be easily customized in different sizes, shapes, and chemical compositions as per your requirements.

The UNS N08811 Coils are manufactured with superior strength. These coils are available in thicknesses between 0.2mm to 5 mm and a width of 3.2mm to 1500mm. They can be availed in cut, beveled, polished, and plain tubing ends as per your requirements. Incoloy Alloy 800HT Shim Stock is used in various industrial systems to fill gaps between apparatus and provide structural support to the entire system. All our products are produced following all international and national standards. If you have any questions or want to get a quote on our products, contact us

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready stock
• Packaging Details: Export Packaging

Superalloy A286 can be hardened and strengthened by heat treatment and is used for applications at temperatures up to 1300° F. A286 stainless can also be used for lower stress applications at higher temperatures. Alloy a286® also maintains excellent high temperature oxidation resistance and is designed to maximize creep and stress rupture properties, with some reduction in strength.  A286 Alloy Industry ApplicationsDue to its inherent beneficial qualities, alloy A286® is commonly used for a wide range of applications, including:

• Frames
• Fasteners
• Wheels
• Blades
• Afterburner Parts
• Casings
• Sockets

Incoloy Superalloy Alloy A286® Format OptionsA286® Alloy stainless steel is available in several forms, including:

• Seamless & Welded Pipe
• Seamless & Welded Tube
• Bar
• Wire
• Sheet
• Plate
• Forgings
• Pipe Fittings
• Flanges

Magellan Metals is your premiere a286® stainless steel alloy supplier. Contact us for more information on our numerous alloy a286® product options, or request a quote today.Temperature Resistant Alloy A286® Material AdvantagesStainless steel a286® is a corrosion resistant austenitic iron-base material that displays a wide range of material benefits for industrial applications across the globe. Some of the main advantages that a286® alloy provides includes:

• Excellent temperature oxidation resistance
• Resistant to corrosion and oxidation
• Designed to maximize creep and stress rupture properties
• Can attain high strength levels when aged after cold work

Contact Tough Alloys for Stainless Steel A286 Alloy

Additional Information:

• Production Capacity: 1000 kgs
• Delivery Time: Ready stock
• Packaging Details: Export packaging

We supply and distribute a full range of products. We have flanges, coils, sheet and plates, fasteners, etc. We develop a premium quality product. We manufacture standard dimensions of products. Our products have seamless finish, higher durability, specification and features which our clients demand. We deliver an order on time. Inconel 718 is an iron-based alloy. It is utilized in heat treat furnace components. They contain excellent features such as durability, sturdy construction, and high performance. Due to all these features, they are used in rocket motors, pump bodies, jet engines and nuclear thrust reversers. Inconel 718 Flanges allow wielding and annealing in heat and cold treatment without spontaneous hardening. It provides high strength because of the addition of molybdenum with niobium. It is also known as a refractory superalloy. Inconel 718 Flanges are most commonly utilized in various industries for aerospace, nuclear reactors, rocket motors, turbopump seals, gas turbines, etc.

We follow a defined standard manufacturing process. In our manufacturing plant, we have installed modern upgraded technology. We have well qualified, hardworking employees. Inconel 718 Flanges is made from high-grade material chemical composition. We order these and all material from reliable vendors. 

We make proper use of our technology and make standard quality, dimensions product. Our high-grade Inconel 718 Flanges give satisfying result to our clients. We maintain a National and International standard. We know from our global stand product. An experienced professional team supervises manufacturing. We make a perfect product and distribute to our clients at factory rate.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

 Inconel 600 is a nickel and chromium based alloy which is perfectly suitable for high-temperature applications. It offers significant resistance to corrosion and oxidation even at elevated temperatures. This alloy has excellent mechanical strength and toughness even in cryogenic conditions. We use superior quality alloy to fabricate Inconel 600 Flanges. We buy a suitable raw material from a trustworthy marketplace. We ensure to check and test the raw material before using it for the fabrication process.

Our company is producing a wide range of Inconel 600 Flanges in various sizes, shapes, thicknesses and dimensions as per industrial requirements. We have highly qualified professionals having many years of experience who monitor each flange at every production stage. They precisely design dimensionally accurate Inconel 600 Flanges. We ensure that each flange undergoes every stage of quality testing. Our quality experts test chemical, mechanical and physical parameters of the flange. We verify the efficiency of Inconel 600 Flanges before dispatching it.

Our company is supplying Inconel 600 Flanges to various industrial sectors including pulp and paper industry, petrochemical industry, oil and gas industry, power plant industry, food processing industry, chemical industry, pharmaceuticals industry, aerospace industry, marine applications etc. We pack these flanges properly to assure safe delivery. We use suitable packaging material to protect flanges from damage, rust and extreme weather conditions. There are numerous shipping options available as per the convenience of our esteem clients

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

 Inconel 601 contains nickel, chromium and iron which offer high-temperature oxidation resistance. This alloy has exceptional creep rupture and stress rupture properties. It has excellent chemical and mechanical properties to achieve the desired result. They can sustain easily at very high temperatures and pressure. This alloy is perfectly suitable, where great surface stability is required. Our manufacturing team develops Inconel 601 Flanges using modern machining method and as per the international standards.

Our company has a high-tech fabrication unit for developing Inconel 601 Flanges in various specifications and dimensions. These flanges are available in several sizes, shapes, and thicknesses as per the customer’s demands. These flanges are reliable for different industrial purpose. We are having qualified professionals having many years of experience in manufacturing Inconel 601 Flanges. We effectively use premium quality of raw material for the fabrication of these flanges. We make sure to test and verify the material before using it for the development. Our experts and workers effectively use modern tools to assemble these flanges.

Inconel 601 Flanges are widely suitable for numerous industries such as oil and gas processing, paper and pulp industries, power generation industries, chemical industry, petrochemical industry, pharmaceutical industry, marine applications, food processing industries and many more. We have a ready stock of flanges to fulfil urgent needs. Our company ensures to provide essential documents and test reports along with Inconel 601 Flanges. We are offering numerous ways of shipping and packaging as per the requirements of our esteem clients. We provide damage-free delivery in the shortest period.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

Pipe fittings are devices that are used to connect pipes, valves, and flanges in piping systems. The Inconel  Pipe Fittings are made with high concentrations of chromium, nickel, and molybdenum. This composition of chemicals gives it excellent resistance against all forms of corrosion and oxidation. These fittings don’t deform or dissociate easily at high pressures and elevated temperatures. The Alloy Fittings possess superior strength and excellent mechanical properties. They possess a minimum tensile strength of 655Mpa and a minimum yield strength of 310 Mpa. Inconel Tube Fittings can be easily elongated by 40% and still possess excellent workability. These fittings have a melting point of about 1413 degrees C and have a long service life. The Inconel  Buttweld Fittings can be produced by hot or cold rolling processes. These fittings are easy to bend and weld. They are available in thickness between Sch 5 to Sch 160 and Sch XXS. We are the top Inconel Fittings manufacturer in India. Our ultimate aim is to produce the best products which are available at feasible rates.

Additional Information:

• Production Capacity: 1000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging