KHATTAR GALI,, Mumbai, Maharashtra
GST No. 27AASHM3103L1ZX
Call 08043851501 86% Response Rate
Minimum Order Quantity: 1 Kg
Product Brochure
Material | Inconel 718 Ams 5662 Round Bars Nickel Alloy 718 |
Material Grade | Inconel 718 |
Size | 5MM TO 350MM DIA |
Shape | Round |
Usage/Application | Industrial |
Standard | ASTM A276 A484 A479 A580 A582 JIS G4303 JIS G4311 DIN 1654-5 DIN 17440 GB/T 1220 |
Grade | Inconel 718 Ams 5662 Round Bars Nickel Alloy 718 |
Type | Bar |
Single Piece Length | 6 meter, 3 meter |
Inconel 718 Material Specification: ASTM B637/ ASME SB637 Inco 718 Round Bar
Grade: Inconel 600 (UNS N06600, Alloy 600, 2.4816), Inconel 601 (UNS N06601, Alloy 601, 2.4851), ASTM B637 Inconel 625 (UNS N06625, Alloy 625, 2.4856), Inconel 800 (UNS N08800, Alloy 800, 1.4876)
Form: Round, Square, Hex (A/F), Bush, Rectangle, Flat, Billet, Ingot, Forging, PSQ Bar, Wire Rod, Wire (Coil Form), Wire-mesh etc.
Size Range: 15NB to 150NB In manufacturing process: Cold drawn/ Extruded
Length: 100 mm To 3000 mm Long & Above
Diameter (Size) : Metric M6 to M48, Inches - 1/4’’ to 2’’
Tolerance : H8, H9, H10, H11, H12, H13, K9, K10, K11, K12 or as per clients’ requirements
Finish : Cold Drawn, Shot Blast & Drawn, 240 Grit Belt Polished, Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish, High Polished
Condition : Cold Drawnd Polished Cold Drawn Centreless Ground & Polished, Threading
Surface : Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline
Inconel® Alloy 718 | |
---|---|
Ni | 50 – 55 |
Fe | Bal |
Cr | 17 – 21 |
Cu | 0.3 max |
Mn | 0.35 max |
P | 0.015 max |
S | 0.015 max |
Si | 0.35 max |
Ti | 0.65 – 1.15 |
Al | 0.2 – 0.8 |
Co | 1.0 max |
B | 0.006 max |
Density | 8.2 g/cm3 |
---|---|
Melting Point | 1350 °C (2460 °F) |
Tensile Strength | Psi – 135,000 , MPa – 930 |
Yield Strength (0.2%Offset) | Psi – 70,000 , MPa – 482 |
Elongation | 45 % |
API 6A 718 2004 | API 6A 718 2009 | Draft API 6A 718 |
---|---|---|
Chemistry requirements – please see our Alloy 718 data sheet | ||
Measured of a remelt ingot per ASTM E354 / ASTM E1473 | No change | Not changed chemistry but added that for 716, 725; 925; 935 and 945 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Kg
Product Brochure
Material | Inconel 800H ASTM B408 Alloy 800H Hex Bar and Incoloy 800H Rod |
Material Grade | ASTM A276, A484, A479, A580, A582, JIS G4303, JIS G4311, DIN 1654-5,DIN 17440,GB/T 1220 |
Size | 5MM TO 350MM DIA |
Standard | ASTM A276, A484, A479, A580, A582 JIS G4303 JIS G4311 DIN 1654-5 DIN 17440 GB/T 1220 |
Type | Bar |
The Incoloy 800 alloy has nickel, iron, and chromium as its main elements, and the chemical composition gives it unique mechanical properties. The Incoloy 800 Round Bar is hot-finished and comes with high tensile strength. The Incoloy 800H Round Bar is also known for its resistance to oxidation and carburization, even at high temperatures. It means that these bars are perfect for elevated temperature applications. This property makes the Incoloy 800HT Round Bar popular in the petrochemical industry. The presence of the nickel element in the alloy helps to increase its resistance to chloride-ion stress corrosion cracking, which is indeed an essential feature of the Alloy 800h Rod.
We are a renowned Incoloy 800 Round Bar manufacturer. We carry out its forging within a temperature range of 2200 degrees F to 1600 degrees F. Formation of chromium carbide precipitate on the Inconel Alloy 800ht Hex Bar is also quite common. It falls in the temperature range of 1400 degrees F to 1000 degrees F. Hence; it becomes essential to cool the parts rapidly through this temperature range. The Uns N08800 Flat Bar is available in a heat-treated and controlled carbon version, which shows better mechanical properties at elevated temperatures.
Clients who want to buy customized and high-quality Nickel Alloy 800h Square Bar at affordable prices can contact us immediately. We use the best raw material and technically advanced equipment while manufacturing Incoloy 800ht forged Bar, making our product dimensionally accurate. Clients in urgent need of Alloy 800 Bright Bar can call us as we have a vast stock. If the required size is not available, we will easily customize it according to the specification given.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Kg
Product Brochure
Material | Inconel 800HT ASTM B408 Alloy 800HT Hex Bar and Incoloy 800HT Rod |
Material Grade | Inconel 800HT ASTM B408 Alloy 800HT Hex Bar and Incoloy 800HT Rod |
Shape | Round |
Size | 5MM TO 350MM DIA |
Usage/Application | Industrial |
Standard | ASTM A276, A484, A479, A580, A582 JIS G4303 JIS G4311 DIN 1654-5 DIN 17440 GB/T 1220 |
Grade | Inconel 800HT |
Type | Bar |
The Incoloy 800 alloy has nickel, iron, and chromium as its main elements, and the chemical composition gives it unique mechanical properties. The Incoloy 800 Round Bar is hot-finished and comes with high tensile strength. The Incoloy 800H Round Bar is also known for its resistance to oxidation and carburization, even at high temperatures. It means that these bars are perfect for elevated temperature applications. This property makes the Incoloy 800HT Round Bar popular in the petrochemical industry. The presence of the nickel element in the alloy helps to increase its resistance to chloride-ion stress corrosion cracking, which is indeed an essential feature of the Alloy 800h Rod.
We are a renowned Incoloy 800 Round Bar manufacturer. We carry out its forging within a temperature range of 2200 degrees F to 1600 degrees F. Formation of chromium carbide precipitate on the Inconel Alloy 800ht Hex Bar is also quite common. It falls in the temperature range of 1400 degrees F to 1000 degrees F. Hence; it becomes essential to cool the parts rapidly through this temperature range. The Uns N08800 Flat Bar is available in a heat-treated and controlled carbon version, which shows better mechanical properties at elevated temperatures.
Clients who want to buy customized and high-quality Nickel Alloy 800h Square Bar at affordable prices can contact us immediately. We use the best raw material and technically advanced equipment while manufacturing Incoloy 800ht forged Bar, making our product dimensionally accurate. Clients in urgent need of Alloy 800 Bright Bar can call us as we have a vast stock. If the required size is not available, we will easily customize it according to the specification given.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Kg
Product Brochure
Shape | Round |
Material | Monel K500 Round Bar Nickel Alloy |
Material Grade | Monel K500 |
Usage/Application | Industrial |
Grade | ASTM A276, A484, A479, A580, A582 JIS G4303 JIS G4311 DIN 1654-5 DIN 17440 GB/T 122 |
Size | 5mm to 350mm |
Product Type | Monel 400 Round Bar |
Alloy K500 is made up of high concentrations of nickel and chromium. The Monel K500 is produced with superior strength and hardness. These alloys are highly resistant to all forms of corrosion and oxidation. They are designed to suffice in high temperatures and extreme pressures. The Monel K500 material possesses superior mechanical properties. They have a minimum tensile strength of 140Ksi and a minimum yield strength of 100Ksi. The alloy is available in hardness of 280 Rockwell and can be easily elongated by 29%. They are widely used in oil and gas refineries, paper production, sensors, electric components chemical industries, etc. We are the leading Monel K500 suppliers. Our goal is to supply the best products in all our outlets which are available at feasible rates.
he Monel Alloy K500 is non-magnetic in low as well as high temperatures. The alloys have exceptional dimensional accuracy and excellent fatigue resistance. They don’t require a lot of maintenance and have a long service life. The Monel K500 Price per kg in India is available in prices between Rs 1200 to Rs 1600. The thickness, size, and other features influence the pricing of the products in this grade. Visit our outlets to get an exact quote on these products as well as our other products.
We are the Alloy K500 suppliers who make use of the latest technology and the best raw materials to produce the best products in the market. These products are produced under the strict guidance of our workers, following all rules and norms set by international and national unions. If you want to get a quote on our products or want to know more about them, contact us for more informationAdditional Information:
View Complete details
Minimum Order Quantity: 1 Kg
Product Brochure
Material | INCONELX750 Round Bar |
Material Grade | INCONELX750 |
Shape | Round |
Size | 5MM TO 350MM DIA |
Usage/Application | Industrial |
Standard | ASTM A276 A484 A479 A580 A582 JIS G4303 JIS G4311 DIN 1654-5 DIN 17440 GB/T 1220 |
Grade | INCONELX750 |
Type | Bar |
Single Piece Length | As per requirement |
Inconel Alloy X750 Round Bar is resistance to an extensive range of industrial corrosives under both reducing and oxidizing conditions. Inconel Alloy 750 Bars has excellent resistance to chloride-ion stress-corrosion cracking, and as well shows appropriate resistance to a number of oxidizing environments’. Inconel 750 Hex Bars is very much resistant to chemical corrosion and oxidation, and has some high stress-rupture effectiveness and low rates under high stresses after suitable heat treatment. Our Inconel X-750 Bars are accessible to our valuable customers in different range of diameters, wall thicknesses and sizes in customized form and also at quite affordable rates.
we offer different types of these bars such as Inconel 750 Hex Bars, Inconel Bright 750 Bars, Inconel Bars, Inconel Flat 750 Black Bars, Inconel 750 Billets Bars, and Inconel 750 Forged Bars. Meanwhile, because of its ease of fabrication, excellent properties, and an extensive range of forms, these WNR 2.4669 Round Bars play a major role in a number of different industries and applications. As a Suppliers and Manufacturer, stockiest and exporter, we offer these Inconel Alloy X750 Round Bars in custom-made sizes and thicknesses, as per the exact demands of our esteemed clients.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Kg
Product Brochure
Material Grade | Inconel 625 |
Material | Inconel 625 |
Grade | Inconel 625 |
Usage/Application | Dairy Pipe, Oil Pipe, Gas Pipe, Fluid Pipe, Boiler Pipe for Chemical Industry |
Size/Diameter | As per Requirement |
Standard | ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB |
Single Piece Length | 3 meter |
Product Type | Inconel 625 |
Surface Finishing | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror fi |
End | Plain End, Beveled End |
Diameter | 5.0mm to 203.2mm |
Is It ISO Certified | ISO Certified |
Additional Information:
View Complete details