Call 08043851501 83% Response Rate

Send Enquiry

our range

Nimonic Product

Wholesale Supplier of a wide range of products which include super alloy nimonic 105 sheet plate, nimonic alloy 75 (uns n06075) plate sheet, super alloy nimonic alloy 263 uns n07263 plate sheet, nimonic alloy 80a (uns n07080) wire, super alloy nimonic 105 wire and super alloy nimonic 90 (uns n07090) sheet plate.
  • Super Alloy Nimonic 105 Sheet Plate
  • Super Alloy Nimonic 105 Sheet Plate
  • Super Alloy Nimonic 105 Sheet Plate
Super Alloy Nimonic 105 Sheet Plate

Super Alloy Nimonic 105 Sheet Plate

Rs 2,599  / KgGet Best Price

Minimum Order Quantity: 1 Kg

Product Brochure

Unit LengthAny Size
MaterialNimonic sheet 105
ShapeRectangular
Material GradeNimonic 105
Single Piece LengthAny Size

Super alloys or high performance alloys are available in a variety of shapes and contain elements in different combinations to obtain a specific result. These alloys are of three types that include iron-based, cobalt-based and nickel-based alloys. The nickel-based and cobalt-based super alloys are available as cast or wrought based alloys based on composition and application.

Super alloys have good oxidation and creep resistance and can be strengthened by precipitation hardening, solid-solution hardening and work hardening methods. They can also function under high mechanical stress and high temperatures and also in places that require high surface stability

Super alloy nNimonic 105™ is a nickel-cobalt-chromium alloy. The following datasheet provides an overview of Nimonic 105™.

Chemical Composition

The chemical composition of Nimonic 105™ is outlined in the following table.

ElementContent (%)
Nickel, Ni 51
Cobalt, Co 18-22
Chromium, Cr 14-15.7
Molybdenum, Mo 4.50-5.50
Aluminum, Al 4.50-4.90
Iron, Fe  1
Manganese, Mn  1
Silicon, Si  1
Titanium, Ti 0.90-1.50
Copper, Cu 0.20
Zirconium, Zr  0.15
Carbon, C  0.12
Sulfur, S  0.010
Boron, B 0.0030-0.010
Physical Properties

The following table shows the physical properties of Nimonic 105™.

PropertiesMetricImperial
Density 8.01 g/cm³ 0.289 lb/in³
Melting point 1327°C 2420°F
Mechanical Properties

The mechanical properties of Nimonic 105™ are displayed in the following table.

PropertiesMetricImperial
Tensile strength (precipitation hardened, value at room temperature) 1150 MPa 167000 psi
Yield strength (precipitation hardened, value at room temperature, @strain 0.200%) 770 MPa 112000 psi
Elongation at break (precipitation hardened) 25% 25%
Thermal Properties

The thermal properties of Nimonic 105™ are given in the following table.

PropertiesMetricImperial
Thermal expansion co-efficient (@20-100°C/68-212°F) 12.2 µm/m°C 6.78 µin/in°F
Thermal conductivity 10.89 W/mK 75.58 BTU in/hr.ft².°F



Additional Information:

  • Production Capacity: 10000
  • Delivery Time: Ready Stock
  • Packaging Details: Export packaging

View Complete details

get quote request a call back
  • Nimonic Alloy 75 (UNS N06075) Plate Sheet
  • Nimonic Alloy 75 (UNS N06075) Plate Sheet
  • Nimonic Alloy 75 (UNS N06075) Plate Sheet
Nimonic Alloy 75 (UNS N06075) Plate Sheet

Nimonic Alloy 75 (UNS N06075) Plate Sheet

Rs 2,599  / KgGet Best Price

Minimum Order Quantity: 1 Kg

Product Brochure

MaterialNimonic 75
ShapeRound and Rectangular
Material GradeNimonic 75
Single Piece LengthAny Size
Usage/ApplicationIndustrial
I Deal InNew Only

NIMONIC alloys are made up of nickel and chromium. These alloys are characterised by their high-temperature low-creep and high performance. Additives like titanium and aluminium are used for enhancing the strength of the alloy. The NIMONIC alloy was first developed during the 1940s in England.

NIMONIC alloys that are available commercially are NIMONIC 75. NIMONIC 90, NIMONIC 100, NIMONIC 80A, 81, 86, NIMONIC 90, NIMONIC PE11 and 16. The NIMONIC alloy 75 is an 80/20 nickel-chromium alloy containing titanium and carbon as additives. This alloy was first introduced for use as turbine blades during the 1940s. It is readily fabricated and welded. This alloy exhibits good corrosion resistance, mechanical properties and heat resistance. Some of the standard forms in which this alloy is available are extruded section, hexagon flats, pipe, plate, strip and wire.

This datasheet will look into the chemical composition, properties and applications of NIMONIC alloy 75.

Chemical Composition

The chemical composition of NIMONIC alloy 75 is given in the following table.

ElementContent (%)
Nickel, Ni Remainder
Chromium, Cr 18-21
Iron, Fe 5.00 max
Silicon, Si 1.00 max
Manganese, Mn 1.00 max
Titanium, Ti 0.2-0.6
Copper, Cu 0.5
Carbon, C 0.08-0.15
Physical Properties

The following table discusses the physical properties of NIMONIC alloy 75.

PropertiesMetricImperial
Density 8.37 gm/cm3 0.302 lb/in3
Mechanical Properties

The mechanical properties of NIMONIC alloy 75 are tabulated below.

PropertiesMetricImperial
Tensile strength(annealed) 750 MPa 109 ksi
Yield strength(annealed) 275 MPa 40 ksi
Elongation at Break 42% 42%
Modulus of Elasticity 206 GPa 29878 ksi


Additional Information:

  • Production Capacity: 10000
  • Delivery Time: Ready Stock
  • Packaging Details: Export Packaging

View Complete details

get quote request a call back
  • Super Alloy Nimonic Alloy 263 UNS N07263 Plate Sheet
  • Super Alloy Nimonic Alloy 263 UNS N07263 Plate Sheet
  • Super Alloy Nimonic Alloy 263 UNS N07263 Plate Sheet
Super Alloy Nimonic Alloy 263 UNS N07263 Plate Sheet

Super Alloy Nimonic Alloy 263 UNS N07263 Plate Sheet

Rs 2,599  / KgGet Best Price

Minimum Order Quantity: 1 Kg

Product Brochure

Unit LengthAs Per Requirement
MaterialNimonic sheet 263
ShapeRectangular
Material GradeNimonic 263
Single Piece LengthAny Size
Usage/ApplicationIndustrial
I Deal InNew Only

Super alloys are also called high performance alloys. They contain a number of elements in a variety of combinations to reach the desired result. These alloys can function in environments with high temperatures and severe mechanical stress, and also in cases where high surface stability is needed. Super alloys have good creep and oxidation resistance.

Strengthening of super alloys is performed by work hardening, solid-solution hardening, and precipitation hardening methods.

Nimonic Alloy 263™ is a British nickel-chromium-cobalt-molybdenum alloy specially meant for use in high temperature and high strength applications. This alloy can be precipitation-hardened.

The following datasheet will provide more details about Nimonic Alloy 263™.

Chemical Composition

The following table shows the chemical composition of Nimonic Alloy 263™.

ElementContent (%)
Nickel, Ni 49
Cobalt, Co 19-21
Chromium, Cr 19-21
Molybdenum, Mo 5.60-6.10
Titanium, Ti 1.90-2.40
Iron, Fe  0.70
Manganese, Mn  0.60
Aluminum, Al  0.60
Silicon, Si  0.40
Copper, Cu  0.20
Carbon, C 0.040 - 0.080
Boron, B  0.0050
Sulfur, S 0.0070
Physical Properties

The physical properties of Nimonic Alloy 263™ are outlined in the following table.

PropertiesMetricImperial
Density 8.36 g/cm³ 0.302 lb/in³
Melting point 1300-1355°C 2370-2471°F
Mechanical Properties

The mechanical properties of Nimonic Alloy 263™ are provided below.

PropertiesMetricImperial
Tensile strength (precipitation hardened, value at room temperature) 940 MPa 136000 psi
Yield strength (@strain 0.200%, precipitation hardened, value at room temperature) 550 MPa 79800 psi
Elongation at break (precipitation hardened) 39% 39%
Thermal Properties

The thermal properties of Nimonic Alloy 263™ are given below.

PropertiesMetricImperial
Thermal expansion co-efficient (@21-100°C/69.8-212°F) 10.3 µm/m°C 5.72 µin/in°F
Thermal conductivity 11.7 W/mK 81.2 BTU in/hr.ft².°F



Additional Information:

  • Production Capacity: 10000
  • Delivery Time: Ready Stock
  • Packaging Details: Export Packaging

View Complete details

get quote request a call back
  • Nimonic Alloy 80A (UNS N07080) wire
  • Nimonic Alloy 80A (UNS N07080) wire
  • Nimonic Alloy 80A (UNS N07080) wire
  • Nimonic Alloy 80A (UNS N07080) wire
  • Nimonic Alloy 80A (UNS N07080) wire
Nimonic Alloy 80A (UNS N07080) wire

Nimonic Alloy 80A (UNS N07080) wire

Rs 2,499  / KgGet Best Price

Minimum Order Quantity: 1 Kg

Product Brochure

Unit LengthAs Per Requirement
Size0.1 to 5mm
MaterialNimonic 80A
Shapewire
Material GradeNimonic 80A
Single Piece LengthAny Size
Diameter0.1 to 5mm
Usage/ApplicationIndustrial
I Deal InNew Only

NIMONIC alloys are primarily composed of nickel and chromium. These alloys are known for their high-temperature low-creep and high performance. Additives like aluminium, carbon and titanium are infused into the alloy. The NIMONIC alloy was first developed in 1940 in England. NIMONIC alloys available commercially are NIMONIC 75, NIMONIC 80A, 81, 86, NIMONIC PE11 and 16.

NIMONIC alloy 80A is a wrought, age-hardened alloy that is strengthened by additives like titanium, aluminium and carbon. It is manufactured by high-frequency melting and casting in air. It is similar to NIMONIC alloy 75. It has good corrosion and oxidation resistance. The creep rupture and tensile properties are high at 815°C (1500°F).

The NIMONIC alloy 80A is used in the following applications:

 

  • Gas turbine engineering
  • Automobile exhaust valves
  • Die-casting inserts and cores
  • Nuclear boiler tube parts


Additional Information:

  • Production Capacity: 10000
  • Delivery Time: Ready Stock
  • Packaging Details: Export Packaging

View Complete details

get quote request a call back
  • Super Alloy Nimonic 105  wire
  • Super Alloy Nimonic 105  wire
  • Super Alloy Nimonic 105  wire
  • Super Alloy Nimonic 105  wire
  • Super Alloy Nimonic 105  wire
Super Alloy Nimonic 105  wire

Super Alloy Nimonic 105 wire

Rs 2,499  / KgGet Best Price

Minimum Order Quantity: 1 Kg

Product Brochure

Unit LengthAs Per Requirement
Size0.1 to 5mm
MaterialNimonic 105
Shapewire
Material GradeNimonic 105
Single Piece LengthAny Size
Diameter0.1 to 5mm
Usage/ApplicationIndustrial
I Deal InNew Only

Super alloys or high performance alloys are available in a variety of shapes and contain elements in different combinations to obtain a specific result. These alloys are of three types that include iron-based, cobalt-based and nickel-based alloys. The nickel-based and cobalt-based super alloys are available as cast or wrought based alloys based on composition and application.

Super alloys have good oxidation and creep resistance and can be strengthened by precipitation hardening, solid-solution hardening and work hardening methods. They can also function under high mechanical stress and high temperatures and also in places that require high surface stability

Super alloy nNimonic 105™ is a nickel-cobalt-chromium alloy. The following datasheet provides an overview of Nimonic 105™.

Applications

 

Nimonic 105™ is used for high temperature gas turbine components.



Additional Information:

  • Production Capacity: 10000
  • Delivery Time: Ready Stock
  • Packaging Details: Export Packaging

View Complete details

get quote request a call back
  • Super Alloy Nimonic 90 (UNS N07090) Sheet plate
  • Super Alloy Nimonic 90 (UNS N07090) Sheet plate
  • Super Alloy Nimonic 90 (UNS N07090) Sheet plate
Super Alloy Nimonic 90 (UNS N07090) Sheet plate

Super Alloy Nimonic 90 (UNS N07090) Sheet plate

Rs 2,599  / KgGet Best Price

Minimum Order Quantity: 1 Kg

Product Brochure

Unit LengthAny Size
MaterialNimonic 90
ShapeRectangular
Material GradeNimonic 90
Single Piece LengthAny Size
Usage/ApplicationIndustrial
I Deal InNew Only

Super alloys have good creep and oxidation resistance, and can be formed in different shapes. They contain a number of elements in a variety of combinations to achieve the desired result, and can function at very high temperatures and mechanical stress. They are classified into three groups such as nickel-based, iron-based and cobalt-based alloys.

Nimonic 90™ is a nickel-chromium-cobalt alloy which can be strengthened by adding aluminum and titanium.

Chemical Composition

The following table shows the chemical composition of Nimonic 90™.

ElementContent (%)
Iron, Fe 58.5
Chromium, Cr 19.5
Cobalt, Co 18
Titanium, Ti 2.5
Aluminum, Al 1.5
Physical Properties

The physical properties of Nimonic 90™ are outlined in the following table.

PropertiesMetricImperial
Density 8.18 g/cm³ 0.296 lb/in³
Melting point 1344°C 2450°F
Thermal Properties

The thermal properties of Nimonic 90™ are given in the following table.

PropertiesMetricImperial
Thermal expansion co-efficient (@ 20-100°C/68-212°F) 12.7 µm/m°C 7.1 µin/in°F
Thermal conductivity (@ 20°C/68°F) 11.47 W/mK 80.46 BTU in/hr.ft².°F


Additional Information:

  • Production Capacity: 10000
  • Delivery Time: Ready Stock
  • Packaging Details: Export packaging

View Complete details

get quote request a call back
  • NIMONIC Alloy 75 (UNS N06075) Round Bar
  • NIMONIC Alloy 75 (UNS N06075) Round Bar
  • NIMONIC Alloy 75 (UNS N06075) Round Bar
NIMONIC Alloy 75 (UNS N06075) Round Bar

NIMONIC Alloy 75 (UNS N06075) Round Bar

Rs 999  / KgGet Best Price

Minimum Order Quantity: 1 Kg

Product Brochure

Unit LengthAny Size
ShapeRound
Material GradeNimonic 75
Single Piece LengthAny Size
Diameter5mm to 350mm
Usage/ApplicationIndustrial
I Deal InNew Only

NIMONIC alloys are made up of nickel and chromium. These alloys are characterised by their high-temperature low-creep and high performance. Additives like titanium and aluminium are used for enhancing the strength of the alloy. The NIMONIC alloy was first developed during the 1940s in England.

NIMONIC alloys that are available commercially are NIMONIC 75. NIMONIC 90, NIMONIC 100, NIMONIC 80A, 81, 86, NIMONIC 90, NIMONIC PE11 and 16. The NIMONIC alloy 75 is an 80/20 nickel-chromium alloy containing titanium and carbon as additives. This alloy was first introduced for use as turbine blades during the 1940s. It is readily fabricated and welded. This alloy exhibits good corrosion resistance, mechanical properties and heat resistance. Some of the standard forms in which this alloy is available are extruded section, hexagon flats, pipe, plate, strip and wire.

This datasheet will look into the chemical composition, properties and applications of NIMONIC alloy 75.

Chemical Composition

The chemical composition of NIMONIC alloy 75 is given in the following table.

ElementContent (%)
Nickel, Ni Remainder
Chromium, Cr 18-21
Iron, Fe 5.00 max
Silicon, Si 1.00 max
Manganese, Mn 1.00 max
Titanium, Ti 0.2-0.6
Copper, Cu 0.5
Carbon, C 0.08-0.15
Physical Properties

The following table discusses the physical properties of NIMONIC alloy 75.

PropertiesMetricImperial
Density 8.37 gm/cm3 0.302 lb/in3
Mechanical Properties

The mechanical properties of NIMONIC alloy 75 are tabulated below.

PropertiesMetricImperial
Tensile strength(annealed) 750 MPa 109 ksi
Yield strength(annealed) 275 MPa 40 ksi
Elongation at Break 42% 42%
Modulus of Elasticity 206 GPa 29878 ksi


Additional Information:

  • Production Capacity: 10000
  • Delivery Time: Ready Stock
  • Packaging Details: Export Packaging

View Complete details

get quote request a call back
  • NIMONIC Alloy 80A (UNS N07080) Round Bar
  • NIMONIC Alloy 80A (UNS N07080) Round Bar
  • NIMONIC Alloy 80A (UNS N07080) Round Bar
NIMONIC Alloy 80A (UNS N07080) Round Bar

NIMONIC Alloy 80A (UNS N07080) Round Bar

Rs 999  / KgGet Best Price

Minimum Order Quantity: 1 Kg

Product Brochure

Unit LengthAny Size
MaterialNimonic 80A
ShapeRound
Material GradeNimonic 80A
Usage/ApplicationIndustrial
I Deal InNew Only

NIMONIC alloys are primarily composed of nickel and chromium. These alloys are known for their high-temperature low-creep and high performance. Additives like aluminium, carbon and titanium are infused into the alloy. The NIMONIC alloy was first developed in 1940 in England. NIMONIC alloys available commercially are NIMONIC 75, NIMONIC 80A, 81, 86, NIMONIC PE11 and 16.

NIMONIC alloy 80A is a wrought, age-hardened alloy that is strengthened by additives like titanium, aluminium and carbon. It is manufactured by high-frequency melting and casting in air. It is similar to NIMONIC alloy 75. It has good corrosion and oxidation resistance. The creep rupture and tensile properties are high at 815°C (1500°F).

This datasheet will look into the chemical composition, properties and applications of NIMONIC alloy 80A.

Chemical Composition

The chemical composition of NIMONIC alloy 80A is given in the following table.

ElementContent (%)
Nickel, Ni 69
Chromium, Cr 18-21
Iron, Fe ≤3
Cobalt, Co ≤2
Titanium, Ti 1.8-2.7
Aluminum, Al 1.0-1.8
Others Remainder
Physical Properties

The following table discusses the physical properties of NIMONIC alloy 80A.

PropertiesMetricImperial
Density 8.19 gm/cm3 0.296 lb/in3
Mechanical Properties

The mechanical properties of NIMONIC alloy 80A are tabulated below.

PropertiesMetricImperial
Tensile strength(annealed) 1250 MPa 181 ksi
Yield strength(annealed) 780 MPa 113 ksi
Elongation at Break 30% 30%


Additional Information:

  • Production Capacity: 10000
  • Delivery Time: Ready Stock
  • Packaging Details: Export packaging

View Complete details

get quote request a call back
  • Super Alloy Nimonic 90 (UNS N07090) Round Bar
  • Super Alloy Nimonic 90 (UNS N07090) Round Bar
  • Super Alloy Nimonic 90 (UNS N07090) Round Bar
Super Alloy Nimonic 90 (UNS N07090) Round Bar

Super Alloy Nimonic 90 (UNS N07090) Round Bar

Rs 999  / KgGet Best Price

Minimum Order Quantity: 1 Kg

Product Brochure

Unit LengthAny Size
MaterialNimonic 90
ShapeRound
Material GradeNimonic 90
Single Piece LengthAny Size
Usage/ApplicationIndustrial
I Deal InNew Only

Super alloys have good creep and oxidation resistance, and can be formed in different shapes. They contain a number of elements in a variety of combinations to achieve the desired result, and can function at very high temperatures and mechanical stress. They are classified into three groups such as nickel-based, iron-based and cobalt-based alloys.

Nimonic 90™ is a nickel-chromium-cobalt alloy which can be strengthened by adding aluminum and titanium.

Chemical Composition

The following table shows the chemical composition of Nimonic 90™.

ElementContent (%)
Iron, Fe 58.5
Chromium, Cr 19.5
Cobalt, Co 18
Titanium, Ti 2.5
Aluminum, Al 1.5
Physical Properties

The physical properties of Nimonic 90™ are outlined in the following table.

PropertiesMetricImperial
Density 8.18 g/cm³ 0.296 lb/in³
Melting point 1344°C 2450°F
Thermal Properties

The thermal properties of Nimonic 90™ are given in the following table.

PropertiesMetricImperial
Thermal expansion co-efficient (@ 20-100°C/68-212°F) 12.7 µm/m°C 7.1 µin/in°F
Thermal conductivity (@ 20°C/68°F) 11.47 W/mK 80.46 BTU in/hr.ft².°F


Additional Information:

  • Production Capacity: 10000
  • Delivery Time: Ready Stock
  • Packaging Details: Export Packaging

View Complete details

get quote request a call back
  • Super Alloy Nimonic 105
  • Super Alloy Nimonic 105
  • Super Alloy Nimonic 105
Super Alloy Nimonic 105

Super Alloy Nimonic 105

Rs 999  / KgGet Best Price

Minimum Order Quantity: 1 Kg

Product Brochure

Unit LengthAny Size
MaterialNimonic 105
ShapeRound
Material GradeNimonic 105
Single Piece LengthAny Size
Usage/ApplicationIndustrial
I Deal InNew Only

Super alloys or high performance alloys are available in a variety of shapes and contain elements in different combinations to obtain a specific result. These alloys are of three types that include iron-based, cobalt-based and nickel-based alloys. The nickel-based and cobalt-based super alloys are available as cast or wrought based alloys based on composition and application.

Super alloys have good oxidation and creep resistance and can be strengthened by precipitation hardening, solid-solution hardening and work hardening methods. They can also function under high mechanical stress and high temperatures and also in places that require high surface stability

Super alloy nNimonic 105™ is a nickel-cobalt-chromium alloy. The following datasheet provides an overview of Nimonic 105™.

Chemical Composition

The chemical composition of Nimonic 105™ is outlined in the following table.

ElementContent (%)
Nickel, Ni 51
Cobalt, Co 18-22
Chromium, Cr 14-15.7
Molybdenum, Mo 4.50-5.50
Aluminum, Al 4.50-4.90
Iron, Fe  1
Manganese, Mn  1
Silicon, Si  1
Titanium, Ti 0.90-1.50
Copper, Cu 0.20
Zirconium, Zr  0.15
Carbon, C  0.12
Sulfur, S  0.010
Boron, B 0.0030-0.010
Physical Properties

The following table shows the physical properties of Nimonic 105™.

PropertiesMetricImperial
Density 8.01 g/cm³ 0.289 lb/in³
Melting point 1327°C 2420°F
Mechanical Properties

The mechanical properties of Nimonic 105™ are displayed in the following table.

PropertiesMetricImperial
Tensile strength (precipitation hardened, value at room temperature) 1150 MPa 167000 psi
Yield strength (precipitation hardened, value at room temperature, @strain 0.200%) 770 MPa 112000 psi
Elongation at break (precipitation hardened) 25% 25%
Thermal Properties

The thermal properties of Nimonic 105™ are given in the following table.

PropertiesMetricImperial
Thermal expansion co-efficient (@20-100°C/68-212°F) 12.2 µm/m°C 6.78 µin/in°F
Thermal conductivity 10.89 W/mK 75.58 BTU in/hr.ft².°F



Additional Information:

  • Production Capacity: 10000
  • Delivery Time: Ready Stock
  • Packaging Details: Export Packaging

View Complete details

get quote request a call back
  • Super Alloy Nimonic Alloy 263 UNS N07263 Round Bar
  • Super Alloy Nimonic Alloy 263 UNS N07263 Round Bar
  • Super Alloy Nimonic Alloy 263 UNS N07263 Round Bar
Super Alloy Nimonic Alloy 263 UNS N07263 Round Bar

Super Alloy Nimonic Alloy 263 UNS N07263 Round Bar

Rs 999  / KgGet Best Price

Minimum Order Quantity: 1 Kg

Product Brochure

Unit LengthAny Size
MaterialNimonic 263
ShapeRound
Material GradeNimonic 263
Single Piece LengthAny Size
Usage/ApplicationIndustrial
I Deal InNew Only

Super alloys are also called high performance alloys. They contain a number of elements in a variety of combinations to reach the desired result. These alloys can function in environments with high temperatures and severe mechanical stress, and also in cases where high surface stability is needed. Super alloys have good creep and oxidation resistance.

Strengthening of super alloys is performed by work hardening, solid-solution hardening, and precipitation hardening methods.

Nimonic Alloy 263™ is a British nickel-chromium-cobalt-molybdenum alloy specially meant for use in high temperature and high strength applications. This alloy can be precipitation-hardened.

The following datasheet will provide more details about Nimonic Alloy 263™.

Chemical Composition

The following table shows the chemical composition of Nimonic Alloy 263™.

ElementContent (%)
Nickel, Ni 49
Cobalt, Co 19-21
Chromium, Cr 19-21
Molybdenum, Mo 5.60-6.10
Titanium, Ti 1.90-2.40
Iron, Fe  0.70
Manganese, Mn  0.60
Aluminum, Al  0.60
Silicon, Si  0.40
Copper, Cu  0.20
Carbon, C 0.040 - 0.080
Boron, B  0.0050
Sulfur, S 0.0070
Physical Properties

The physical properties of Nimonic Alloy 263™ are outlined in the following table.

PropertiesMetricImperial
Density 8.36 g/cm³ 0.302 lb/in³
Melting point 1300-1355°C 2370-2471°F
Mechanical Properties

The mechanical properties of Nimonic Alloy 263™ are provided below.

PropertiesMetricImperial
Tensile strength (precipitation hardened, value at room temperature) 940 MPa 136000 psi
Yield strength (@strain 0.200%, precipitation hardened, value at room temperature) 550 MPa 79800 psi
Elongation at break (precipitation hardened) 39% 39%
Thermal Properties

The thermal properties of Nimonic Alloy 263™ are given below.

PropertiesMetricImperial
Thermal expansion co-efficient (@21-100°C/69.8-212°F) 10.3 µm/m°C 5.72 µin/in°F
Thermal conductivity 11.7 W/mK 81.2 BTU in/hr.ft².°F



Additional Information:

  • Production Capacity: 10000
  • Delivery Time: Ready Stock
  • Packaging Details: Export Packaging

View Complete details

get quote request a call back
  • Super Alloy Nimonic Alloy 263 wire
  • Super Alloy Nimonic Alloy 263 wire
  • Super Alloy Nimonic Alloy 263 wire
  • Super Alloy Nimonic Alloy 263 wire
  • Super Alloy Nimonic Alloy 263 wire
Super Alloy Nimonic Alloy 263 wire

Super Alloy Nimonic Alloy 263 wire

Rs 2,499  / KgGet Best Price

Minimum Order Quantity: 1 Kg

MaterialNimonic 263
GradeNimonic 263
Diameter0.1mm to 5mm
Usage/ApplicationIndustrial
I Deal InNew Only

Super alloys are also called high performance alloys. They contain a number of elements in a variety of combinations to reach the desired result. These alloys can function in environments with high temperatures and severe mechanical stress, and also in cases where high surface stability is needed. Super alloys have good creep and oxidation resistance.

Strengthening of super alloys is performed by work hardening, solid-solution hardening, and precipitation hardening methods.

Nimonic Alloy 263™ is a British nickel-chromium-cobalt-molybdenum alloy specially meant for use in high temperature and high strength applications. This alloy can be precipitation-hardened.

The following datasheet will provide more details about Nimonic Alloy 263™.

Applications

 

Nimonic Alloy 263™ is mainly used in gas turbine hot section components.



Additional Information:

  • Production Capacity: 10000
  • Delivery Time: Ready Stock
  • Packaging Details: Export Packaging

View Complete details

get quote request a call back
  • Nimonic Alloy 75 (UNS N06075) Wire
  • Nimonic Alloy 75 (UNS N06075) Wire
  • Nimonic Alloy 75 (UNS N06075) Wire
  • Nimonic Alloy 75 (UNS N06075) Wire
  • Nimonic Alloy 75 (UNS N06075) Wire
Nimonic Alloy 75 (UNS N06075) Wire

Nimonic Alloy 75 (UNS N06075) Wire

Rs 2,499  / KgGet Best Price

Minimum Order Quantity: 1 Kg

Unit LengthAs Per Requirement
Size0.1 to 5mm
MaterialNimonic 75
Material GradeNimonic 75
Single Piece LengthAny Size
Diameter0.1 to 5mm
Usage/ApplicationIndustrial
I Deal InNew Only

NIMONIC alloys are made up of nickel and chromium. These alloys are characterised by their high-temperature low-creep and high performance. Additives like titanium and aluminium are used for enhancing the strength of the alloy. The NIMONIC alloy was first developed during the 1940s in England.

NIMONIC alloys that are available commercially are NIMONIC 75. NIMONIC 90, NIMONIC 100, NIMONIC 80A, 81, 86, NIMONIC 90, NIMONIC PE11 and 16. The NIMONIC alloy 75 is an 80/20 nickel-chromium alloy containing titanium and carbon as additives. This alloy was first introduced for use as turbine blades during the 1940s. It is readily fabricated and welded. This alloy exhibits good corrosion resistance, mechanical properties and heat resistance. Some of the standard forms in which this alloy is available are extruded section, hexagon flats, pipe, plate, strip and wire.

The NIMONIC alloy 75 is used in the following applications:

 

  • Aerospace fasteners
  • Gas turbine engineering
  • Industrial furnace structural parts
  • Heat treatment equipments
  • Nuclear engineering.


Additional Information:

  • Production Capacity: 10000
  • Delivery Time: Ready Stock
  • Packaging Details: Export Packaging

View Complete details

get quote request a call back
  • Super Alloy Nimonic 90 (UNS N07090) wire
  • Super Alloy Nimonic 90 (UNS N07090) wire
  • Super Alloy Nimonic 90 (UNS N07090) wire
  • Super Alloy Nimonic 90 (UNS N07090) wire
  • Super Alloy Nimonic 90 (UNS N07090) wire
Super Alloy Nimonic 90 (UNS N07090) wire

Super Alloy Nimonic 90 (UNS N07090) wire

Rs 2,499  / KgGet Best Price

Minimum Order Quantity: 1 Kg

Unit LengthAs Per Requirement
Size0.1 to 5mm
MaterialNimonic 90
Shapewire
Material GradeNimonic 90
Single Piece LengthAny Size
Diameter0.1 to 5mm
Usage/ApplicationIndustrial
I Deal InNew Only

Super alloys have good creep and oxidation resistance, and can be formed in different shapes. They contain a number of elements in a variety of combinations to achieve the desired result, and can function at very high temperatures and mechanical stress. They are classified into three groups such as nickel-based, iron-based and cobalt-based alloys.

Nimonic 90™ is a nickel-chromium-cobalt alloy which can be strengthened by adding aluminum and titanium.

Nimonic 90™ is used in high temperature and strength gas turbine components



Additional Information:

  • Production Capacity: 10000
  • Delivery Time: Ready Stock
  • Packaging Details: Export Packaging

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES